0
What else can I help you with?
Daewoo Leganza 2000.When you start engine you get a 4000 rpm and don't stay less what can be a problem?
check your accelerator...
Do you need to use permetex when replacing a valve cover gasket on a 2000 Daewoo?
If you are using a new gasket, no.
How do you remove a Daewoo immobilizer?
The first step to remove a Daewoo immobilizer control unit is to disconnect the negative battery cable. Remove the knee bolster panel and the instrument panel side cover. Unbolt the knee bolster and remove it. Unbolt the immobilizer unit. Finally, remove it and disconnect all electrical connectors.
Where is the starter motor located on frontera 2197cc?
By frontera do you mean Suzuki Fortera? This is a product of Daewoo Division of General Motors Corporation. It's a real oddball here, less common than most Ferrari's in my (ghetto) neighborhood, but I'd expect it's near the flywheel somewhere. Expect to see a Denso starter with 3 mounting bolts.
1995 daewoo espero and the blinkers stop flashing there is no problem with the fuse Any suggestions on what might be causing this and how to fix it?
Could be a bad flasher
Where is the camshaft position sensor located on a 2002 Daewoo Leganza engine?
The camshaft position sensor is located in the engine compartment of the 2002 Daewoo Leganza. It is at the end of the camshaft housing.
2000 Daewoo Leganza engine timing diagram?
what is the timing marks on the camshaft what is the timing marks on the camshaft
Where is the crank shaft position sensor on a Daewoo Leganza?
On the Daewoo Leganza it is located behind the AC compressor.
Where is the cam positioning switch on a 2001 Daewoo Leganza?
For DOHC engines its located under the sparks plugs cover near the camshaft sprocket.salehanzi@yahoo.com
Where is the camshaft position sensor on a 2001 Daewoo LeGanza?
On a 2001 Daewoo Leganza, the camshaft position sensor is located near the top of the engine, typically on the cylinder head. It is often positioned near the timing cover or attached to the camshaft itself. To access it, you may need to remove some engine covers or components. Always consult the vehicle's service manual for specific details and diagrams.
When was Daewoo Leganza created?
Daewoo Leganza was created in 1997.
Diagram of where park neutral switch is located on 2002 Daewoo Leganza?
where is it located
Where is the camshaft position sensor located on a 2002 Daewoo laganza?
The camshaft position sensor is located on the end of the camshaft housing, on a 2002 Daewoo. The sensor should be labeled as such.
Where is the fuel filter located on a 2001 Daewoo Leganza?
On the fire wall.
Where is the fuel filter located on a Daewoo Leganza?
The Leganza fuel filter is located behind the egine on the panel wall.Make sure you depressure it before removing.
Which is the fuse for the radio in a daewoo leganza?
It will be located in the same box as the others underneath the dash.
How do you replace camshaft sensor on 2000 Daewoo Leganza?
To replace the camshaft sensor on a 2000 Daewoo Leganza, first disconnect the negative battery terminal to ensure safety. Locate the camshaft sensor, which is typically found near the engine's camshaft or timing cover. Unplug the electrical connector and remove the mounting bolts to take out the old sensor. Install the new sensor by reversing the process, ensuring it is securely fastened and the connector is properly attached before reconnecting the battery.
