The front brakes on any vehicle do most of the stopping. When you apply the brakes the weight shifts to the front of the vehicle. For this reason the front brakes are needed more than the rear. Try stopping a vehicle with just the hand brake which applies only the rear brakes.
By the hissing noise it sounds like you need a new brake booster
It is a 3/8 Allen wrench
If memory serves, the typical braking force ratio for any automobile with front disc and rear drum brakes is 60% front, 40% rear +/-.
If you only did the front brakes, the problem may be in the rear brakes.
you will need to bleed your brakes .allways start with the brake the farthest from the master cylinder , you can either gravity bleed them by yourself by loosening the bleeder valve on each wheel for 30 minutes each or have someone pump the brakes for you . have them pump the brakes until they get a partial pedal and hold until you release the wheel bleeder .repeat process 3 or 4 times until fluid is free of air and repeat process on each wheel .if this doesnt work you might need to replace youe master cylinder
i did my brakes most of the time it will only need an hour of my time to do both front brakes.....
What size wrench do you need to change the front brakes on a 2001 dodge durango?"
No you don't, the front and rear brakes are independent of one another. -Sean Ford Mechanic Riverside,CA
Rear brakes do not have to be replaced too often. It's really hard to tell without looking at it. What you can do is to replace front brakes and test drive it, if you feel that your car brakes works just fine you do not need to replace rear brake shoes.
what size allen wrench do i need to change front brakes on a 2004 dodge grand caravan
Is it like regular brakes are is there something special tool I need ?
first you need to check your brakes 2000 vehicles dont have front drums, they have disk brakes
No
Front pads (disc brakes) Rear shoes (drum brakes)
No you dont have to. All I did was was pump the brakes with the car running
They need replaced when they wear out.
What do you need to know?