If the bushings wear enough (usually are 95% of the squeaking problems) the front wheel alignment can change and can wear the tires faster if not make the vehicle pull to one side of or the other.
There are rubber bushings on the bolts that attatch to the frame that keeps some of the vibration and noise down. They can dry out or harden and can either fall out or twist enough to wear metal to metal.
Answer: If its a high-pitched squeak, it sounds like the wear sensor on the inner brake lining.
electrical problem,ford bantam 1600 1997
please answer my question. Ford truck 1999 V8 4.6 L does not start of park but in neutral sometimes Why.
No , actually the Ford 300 cubic inch / 4.9 liter inline ( straight ) six cylinder engine has gears that mesh with each other on the front end of the crankshaft and the front end of the camshaft so it doesn't use a timing chain or a timing belt
This is a big job and the ft end needs aligned after it is done. Get amanual on your car from the parts store.
yes
because it is a crappy ford, get a Chevy and you well not have any problems.
imy 2000 ford ranger has a squeak in the front end when i go over a bump or turn it mine has the squeak too,,, so i have heard that its the power steering pump and the rubber bushings that help the cab not jar so bad i havent figured out what it is but when i do I'll post beck
On the 1997 Ford F150, the differential could be in both the front and rear. From 1997 and on Ford used two different axles. Your truck could either have the 8.8 or 9.75 differential. If you have a rear differential you would need to lower your spare tire to have access to it.
NO
FIREWALL 4 - 8 3 - 7 2 - 6 1 - 5 FRONT
fire truck Mack Ford
There are ( shock absorbers ) on a 1997 Ford Aerostar ( front and rear )
On the top of the truck
body mounts, they are junk along with 90% of the rest of the truck. at least you dont have a squeak, a rear window that wont open, windshield wipers that only work on hi, and a steering wheel you cant adjust because if you do the wiring harness inside steering coloumn will pull wires out. GREAT JOB ford engineers you guys are brilliant
the rear end of the the truck!! there's one on the front if it's 4X4
Front and Rear are 5x7