Exterior house paints must be oil based because of the weather. If a water based paint is used, the paint will be damaged when it rains. Using a water based paint would be like coloring the outside of your house with washable markers.
Exterior Paints DON'T Have to be Oil BasedThe vast majority of exterior paints are water-soluble. Though water is the carrier, once an acrylic latex paint cures, it is no longer soluble in water, so the notion that it's like a washable marker is ridiculous. In testing, water based paints often outlast oil based paints because they form a non-reacting, flexible covering, while oil based paints are rigid (so they crack with expansion and contraction) and continuously oxidize, leaving a chalky surface.Oil based paints can leave a nicer finish, particularly when glossy, because they flow better and dry more slowly than latexes. If you already have several layers of oil-based paint on, it's best to stick with it. Other than that, water based paints are better for most applications, interior or exterior.
_______________________________________________
I am in agreement...No Oil On Exteriors...you can't buy oil-based paint in volume anymore thanks to "o.s.h.a.".
Exterior latexes have elasticity and conform to weather changes. You can buy "Floetrol" if you're having a leveling problem. This reduces the viscocity of the paint thereby allowing it to lay down and self-level. If you're having the same problem with oil, use "penetrol" or "naptha".
#####
In some applications, exterior paints are better!
Don't use latex paint. Latex paints are a marvelous invention for many reasons but, in some applications and under some conditions, gloss and semi-gloss latex paints can develop a "tackiness" that seems to last forever. I painted a garage door with an exterior latex paint over 5 years ago; in the warm weather, I still hear the sound of the tacky paint breaking contact as the door goes up!
The problem is known as "blocking", and can be caused by many factors such as applying an overly thick layer of paint, not allowing adequate drying between coats, reactions between the primer and the finish coat or the temperature at which the paint was applied -- too hot or too cold.
The best way to avoid blocking is to use an oil-based exterior alkyd paint instead. Alkyd paints, which are the top quality oil paints, dry hard, smooth, and do not produce tackiness. There are mixed views among painters on preparation for a latex-to-oil changeover. Oil paint can be applied over latex without priming as long as the environmental conditions are not too demanding. A light sanding OR the use of a "deglosser" such as Wilbond is essential for a firm paint bond. In the case of exterior doors, I vote for (at the least) sanding followed by priming the doors prior to applying the oil. The primer must be an exterior grade and can be either oil- or water-based. Again, there are some strong opinions on using either type of primer. Be sure it is an exterior grade. Under NO circumstances use Kilz, BIN, or any of the other interior primers.
Depending on location of painted surface, wood can become hot enough under exposure to the sun to blister paint and distort certain plastic moldings that some companies use to mount the window glass! This can cause the paint to prematurely fade or appear weathered. In fact, this overheated situation can even cause wood to expand and contract severely enough to cause cracks! And, guess what makes the situation even worse? Dark pain colors!
A final comment concerning blocking: if you are not ready to repaint and you would like to eliminate any tackiness, one method that I have used successfully is to apply auto or paste wax to the sticky area. The wax coating removed the tackiness, though it may have to be repeated occasionally when any tackiness reoccurs.
I believe that you prime than paint than seal. It depends on the paint you are using and what you are painting A lot of the exterior paints used today don't require any undercoat. However if you are painting over a previously painted surface you must keep preparation in mind.
Solvent based paint will use a special thinner, and generally be smellier till it dries. Water based paint needs no special thinner and is not smelly.
Water based paint such as latex and acrylic do not adhere well to oil paint. In order to paint over oil paint you must sand the surface and prime it with a good quality oil or alcohol based primer and then top coat with a water based paint. Oil based paints will adhere well to water based paints sp it is unnecessary to prime before top coating, unless you have had to do any repairs to the surface.
NO! An exterior rated primer must be used. Plus, choose a primer that is recommended for the surface you plan on painting.
Quoted from www.epa.gov/lead.Federal law requires that individuals receive certain information before renting or buying a pre-1978 housing:LANDLORDS must disclose known information on lead-based paint and lead-based paint hazards before leases take effect. Leases must include a disclosure form about lead-based paint.SELLERS must disclose known information on lead-based paint and lead-based paint hazards before selling a house. Sales contracts must include a disclosure form about lead-based paint. Buyers have up to ten days to check for lead hazards.More information on the disclosure program. Federal law requires that individuals receive certain information before renting or buying a pre-1978 housing:LANDLORDS must disclose known information on lead-based paint and lead-based paint hazards before leases take effect. Leases must include a disclosure form about lead-based paint.SELLERS must disclose known information on lead-based paint and lead-based paint hazards before selling a house. Sales contracts must include a disclosure form about lead-based paint. Buyers have up to ten days to check for lead hazards.Go to the website listed above for more details.Submitted by Catherine Brooks, Eco-Strip LLC (seller of Speedheater™Infrared Paint Remover, an EPA-compliant method of safe lead paint removal)
Unfortunately combining oil and water in paint always results in disaster. Oil based paints must be thinned with solvent. Brushes used to paint oil based paints also need to be cleaned with solvent.
I believe that you prime than paint than seal. It depends on the paint you are using and what you are painting A lot of the exterior paints used today don't require any undercoat. However if you are painting over a previously painted surface you must keep preparation in mind.
Solvent based paint will use a special thinner, and generally be smellier till it dries. Water based paint needs no special thinner and is not smelly.
Apply the water proofing exterior walls to save it during the rough weather. Furthermore,
Yes, living in a house while painting can be dangerous, especially if you're using oil-based paints or strong solvents that emit volatile organic compounds (VOCs). These chemicals can cause respiratory issues, headaches, and other health problems. Additionally, wet paint can be a safety hazard, particularly for children and pets. It's advisable to ensure proper ventilation and safety measures if you must stay in the house during the painting process.
The internal angles of a regular nonagon are 140o, so the exterior angles must be 220o (360o-140o).
Your street address is based on where your house is, so to change it, you must move. Your IP address is based on your ISP, if you want to change it, change ISPs.
Your street address is based on where your house is, so to change it, you must move. Your IP address is based on your ISP, if you want to change it, change ISPs.
To prep your house for a fresh coat of paint, start by cleaning the exterior thoroughly—pressure wash dirt, mold, and grime. Scrape off old, peeling paint, then sand rough spots for a smooth surface. Repair any cracks or holes with filler, and make sure the surface is dry before you start. Finally, apply a good primer to help the new paint stick. For a hassle-free finish, consider professional exterior painting services to ensure a long-lasting, flawless result. Visit: Violet Painting Services
An exterior angle of a decagon can have any value in the range (0, 360) degrees - excluding 180 degrees. The only constraint is that the sum of all exterior angles must be 360 degrees.
Water based paint such as latex and acrylic do not adhere well to oil paint. In order to paint over oil paint you must sand the surface and prime it with a good quality oil or alcohol based primer and then top coat with a water based paint. Oil based paints will adhere well to water based paints sp it is unnecessary to prime before top coating, unless you have had to do any repairs to the surface.
On the front and back of the exterior of the vehicle.