0
Could be vapor lock. The vent on your gas cap may be clogged
Wiki User
∙ 16y ago
Add your answer:
Earn +20 pts
How do you know if the starter needs to be replaced on a 1993 Nissan Altima?
Take the steering column housing off (usually held by 4 screws from the bottom) and remove the starter cap from the back of the ignition cylinder. In a Nissan, the ignition cylinder usually has a T shaped pin which turns the starter. if you can start your vehicle by turning the starter cap with a screw driver, you probably don't have an issue with the starter.
1993 Nissan 240 sx will not start battery is ok makes no sound when key is turned had to roll in 2nd gear to start to get home?
you need a new starter motor,
1993 Nissan bluebird turns over no start will cams turn if chain broken?
no the cams shouldn't turn if the chain is brokrn. It may be streched and or the tentioner may be worn out.
What is the tire pressure for a Nissan Serena 1993?
It should have a max pressure on the tyre.
How do you tighten power steering belt?
I have a 1993 Nissan Altima, in which I had to loosen the Alternater Adjustment screws to get the old belt off. After replacing the belt, simply retighten the bolts until the belt is snug. Hope this helps.
Why is your 1993 Altima Nissan making a clicking noise but does not start?
Why is your 1993 Altima Nissan making a clicking noise but does not start?
When was Nissan Altima created?
Nissan Altima was created in 1993.
Oil capacity on a 1993 Nissan Altima?
The oil capacity on a 1993 Nissan Altima is approximately 4.1 quarts. The oil that should be used is 5W-30.
Does a 1993 Nissan Altima have an interference engine?
Yes it does
For how many years has Nissan been selling the Altima?
The Nissan Altima was introduced in 1993 as a replacement for the Nissan Bluebird. Originally, it was named the "Stanza Altima," before the model name was shortened to its current form.
Does a 1993 Nissan Altima have a timing belt?
No, timing chain.
Where is the IAT sensor on a 1993 Nissan Altima?
its in the intake manifold
Will a cv axle for a 1995 Nissan Altima fit a 1993 Nissan Altima?
yes 93-97 as long as there is not a difference in abs or limited slip diff
How long has Nissan been producing the nissan altima?
The first generation of Nissan Altimas was produced in 1993. The Nissan Altima is still being produced today, with a new 2010 design just being released.
Where is the crank sensor located on a 1993 Nissan Altima?
There is none; it's the distributor.
Does the 1993 Nissan Altima has a crankshaft sensor?
no. didn't come out until 1995
1993 Nissan altima 2.4 where is the location of the crankshaft sensor?
Located in the distibutor!!
