answersLogoWhite

0


Best Answer

Your computer or Module is faulty.

User Avatar

Wiki User

14y ago
This answer is:
User Avatar

Add your answer:

Earn +20 pts
Q: Why would 2 injectors not pulse?
Write your answer...
Submit
Still have questions?
magnify glass
imp
Related questions

What would cause tbi injectors to stay open and spray fuel but not pulse?

A bad ingnition module, Are a bad computer.


What would cause fuel injectors to keep burning up on a 1989 Celebrity?

I would suspect over voltage as to the reasons why fuel injectors would burn out. The pulse that opens the injectors comes from the engine control module so I would check that along with associated wiring. Check the wiring for shorts to other wires.


No pulse to injectors on a Nissan Sentra?

Make sure you have the ignition supply for the injectors. Check the starter signal input to the engine computer.


1991 MIATA no injector pulse what to do?

92 mazda miata not pulsation in the injectors


92 Chevy Caprice HAS no injector puLSE?

A 92 Chevy Caprice that has no injector pulse mostly likely has clogged injectors or a defective fuel pump. Fuel injectors must be cleaned periodically to removed buildup for peak performance.


How can you check if there is power going to the fuel injectors on my gmc sirrea with a 305?

use a noid light set to determine if pulse is going to the fuel injectors.


95 Ford F-150 losing injector pulse?

Injector pulse is controlled by the ECU. Injectors Have a red wire that is hot. Black wire is controled by computer ground...


What triggers the injectors to fire on a 1996 ford f 350 460 efi?

The engine computer fires the injectors. The timing of the injector pulse is determined with info from all of the senors on the engine.


What should you do in a 1995 Chevy G20 van if you cant get the injectors to fire when they have power to them unless you hot wire them?

No pulse signal to injectors (bad injector relay or PCM driver circuit).


What causes your injectors not to dispense fuel?

low or no fuel pressure clogged injector no pulse signal coming from fuel compter


Why injectors want pulsate on a 1991 gmc pick up?

They are supposed to, that's how they work. its called Noid pulse and its controll by the ECM


How do the injectors receive a pulse signal on an 88 jeep 4.0 in line 6-cylinder engine?

from PCM (powertrain control module)