your slave cylinder is bad and its leaking,its located on side of transmissionon rubber cover,if its not bad ,then u will need new clutch.
The transmission input shaft has gears on it that mesh with the different drive gears. It is spun by force from the engine, as you select different gears with the shifter, there are different sets of gears being meshed together inside transmission. The synchronizers ensure that the gears being meshed together are turning at the same speed, thus resulting in a smooth shift and no damage to the gears.
CANT GET THE SHIFT LEVER OUT OF PARK
rev matching is to keep the rpm high while your shifting through gears. clutch, gas, shift, this technique can be found in the drifting seen.
you go to multiplayer, then to split screens
There is probably a leak in your auto matic transmission, check the level (just the same as checking your oil, but it is in a different place). You can buy the fluid cheaply from the supermarket.
Need more information. Namely, what the truck and transmission is, and whether it's a transmission fault, or you just not knowing how to shift it.
there is no Chevy town and country. its a Chrysler.
Your truck may not shift gears because the transmission sensor is damaged or broken. It also may not shift gears because the transmission or linkage is damaged.
my merucry mystique dont shift gears fast
It might be that your clutch is not disengaging properly, so your gears won't shift.
No, it is not possible to shift multiple gears simultaneously on a motorcycle. Gears must be shifted one at a time in sequence.
To shift gears on a road bike effectively, use the right hand to shift the rear gears and the left hand to shift the front gears. Anticipate the terrain and adjust gears before reaching a hill or descent. Shift one gear at a time and pedal lightly while shifting to avoid chain slipping. Practice shifting on flat terrain to get comfortable with the process.
Yes motorcycle gears will shift up and down.
Shifter or Shift Knob
you have to shift gears
One of the most common causes of gears in a Mercedes Benz A class 160 automatic gearbox to slip and not shift up to higher gears is a bad transmission. If the transmission is failing, or not working properly, you won't get the gears to shift up.
In a manual transmission between the gears. If one fails it will make it very difficult or impossible to shift in to the lower gear, i.e. if the 2nd gear synchronizer goes out you cant shift from 3rd to 2nd gear