As far as bolting up, yep, it's a go. Not certain how many, if any, sensors would need to be added to the block and/or heads. Also, the distributor will need to be the one from the TBI engine, since it functions as a cam position sensor for the injection/computer. A friend put a 1990 TBI 360 into a 1985 Chrysler Fifth Avenue after swapping the injection for a 4 barrel intake and carb, so I know it bolts up.
first install new carb gasket to intake manifold and then 4 nuts hold the carb to the intake studs and then install the throttle linkage to the carb.
how much would a 1974 dodge dart custom in good condition with 85 thousand miles be worth?
5x4.5
which window?, and whats wrong with it?
Try placing an ad on eBay or craigslist.com
first install new carb gasket to intake manifold and then 4 nuts hold the carb to the intake studs and then install the throttle linkage to the carb.
It might be a wire going to the thermostat housing, or possibly it connects to a sensor screwed into the intake manifold near the thermostat hosusing.
Yes
5900lb
Of the 16,437 Dodge Challengers sold in 1974, 6,063 had the 360 engine.
Firing orders are usually written on the intake manifold. Check there first. But if memory serves it's 1-8-4-3-6-5-7-2.
Tomory Dodge was born on 1974-12-23.
David F. Dodge died in 1974.
5.2 liters
The maximum speed of the 1974 Dodge Challenger is 150 mph.
The new Dodge Challenger was inspired by the old Dodge Challenger from 1970-1974.
how much would a 1974 dodge dart custom in good condition with 85 thousand miles be worth?