It should be acceptable. You might want to take the paint to the paint store for a thorough shaking. While there, buy a straining mesh and a clean, sealable container. When you get home, strain the paint from the old bucket to the new container.
As long as everything in the can mixes and it has not been frozen, you will be OK to use it.
the use of lead in paint has been iliegl for a number of years since 80s all exterior paints are lead free now
no, the use of lead paint has been illeagal for decades
No, you can not use house paint to paint an oven. You must use a high temperature paint
You can use either water or oil based paint, which are both available in a variety of sheens to paint molding. Water based satin coatings are very popular for crown molding in 2012 and have been for several years, while an oil based semi-gloss are the best choice for baseboards and door moldings where available.
If you are trying to protect a design, use three coats of acrylic polyurethane. If you are trying to repaint a chair that has been coated with acrylic paint, use acrylic paint again.
data storage where have you been for the last 20 years
You use an anti-rust enamel.
the use of lead in paint has been iliegl for a number of years since 80s all exterior paints are lead free now
it would be easier to use new brake fluid that doesnt trash paint. older brake fluid that trashes paint was made from vegetablr oils, newer fluids are synthetic and have not been detrimental to paint in years,unless you have really crappy paint to start with
no, the use of lead paint has been illeagal for decades
electrostatic charge is what makes the powder paint stick to the object until the paint has been baked in the oven.
Yes, you can use acrylics on clay after the clay has been dried.
in over 40 years I have never seen a paint that could be folded with out cracking but it does exist,
No, you can not use house paint to paint an oven. You must use a high temperature paint
You can use either water or oil based paint, which are both available in a variety of sheens to paint molding. Water based satin coatings are very popular for crown molding in 2012 and have been for several years, while an oil based semi-gloss are the best choice for baseboards and door moldings where available.
The nimble storage company makes software and hardware that is required for data storage and is mainly use for backup.The company has been growing a lot recently.
The storage of data is called "archiving".