Won't GO in gear - check fluids
Won't go INTO gear - Trans linkage loose or broken. Worse - trans pump or pump shaft is broken .
Won't come out of park - check the brake light fuse, it may be blown.
It is quite possible that your clutch is not disengaging the transmission from the motor. Also, your synchros could be bad, which would not allow it to go into gear.
The clutch is master and or slave cylinder are bad
Key won't turn or it does and the engine won't turn over?
if your talking about when your cranking the engine over with the cap off, then you have a broken distributor gear or shaft or bad camshaft gear.
how bout this on the 79 there is a vacum line to the trannie connects to trannie if comes off car wont go into gear look under for lose hoses. hope this helps
Gear up then
1999 ford explorer 4.0 manual transmission gear shifter wont fit on shaft
synchro plates went out
How to adjust the shifter on a Harley Davidson
To remove a struck breather gear from a Harley engine you need to follow the instructions on the user manual.
my 94 Toyota corolla will not go into any gears .
The clutch is bad or out of adjustment.
bad transmission..... expensive repair.
Most likely a broken gear cluster
if you mean it wont go into gear and it grinds like a sob but other gears still work synchronizers. if you mean the shifter is loose an cant find the gear anymore - linkage. if it wont go into any gear sounds like a clutch problem
My first suspect would be the clutch. Have a competent mechanic take a look at it.
my 96 lincolntown car wont go in gear and the abs system light comes on