0
What else can I help you with?
Wiper motor will not turn off?
You may have a bad wiper motor switch or eletrical short
Wiper Park Switch were is it located?
Usually it is part of the wiper motor.
On a 98 Chrysler minivan why do the wipers stop anywhere on the windshield and not at the bottom?
There is a switch inside the wiper motor that identifies the home spot for the wipers. If you have intermittent wipers there is also a controller for that. Either can give you problems but more likely the wiper motor switch. The wiper motor switch usually is not a separate part (comes with wiper motor assy.) Oh yeah, 1 other thing, be sure the wiper arms are installed correctly on wiper motor.
Is the park switch on a 1976 Chevy pickup wiper motor in the pump or the motor?
It is in the motor.
What to do when the windshield wipers don't move when you turn the switch on?
check the wiper fuse. then check the switch, then check the wiper motor
Why doesn't your 1989 Corsica wiper switch shut-off?
Possibly bad wiper motor, bad park switch, or bad wiper switch. Electrical short also possible.
How do you get fire to the wiper motor on 1985 s-10 blazer?
Fire, or power, to the wiper motor in a 1985 s10 Blazer comes from the battery, through the wiper switch and to the motor. Check the switch, fuse, and all connections to find the loss of power.
Why don't a new wiper motor in A 1995 ford explorer work and you've checked the fuses and relays and it still don't work?
It may be the wiper switch, it may be the motor. You may want to try putting power directly to the motor to confirm that the motor is good.
What are the dip switch settings on a 1997 sunfire windshield wiper motor?
Please clarify or explain what you are trying to accomplish. There are no dip switch setting on that wiper motor that I have ever seen.
How do you test Acura MDX rear wiper motor?
To test the Acura MDX rear wiper motor, first, ensure that the vehicle is turned off and the wiper switch is in the "off" position. Disconnect the motor's electrical connector and use a multimeter to check for voltage at the connector while activating the rear wiper switch; you should see voltage if the switch and wiring are functioning correctly. If there is voltage present but the motor does not operate, the motor may be faulty and should be replaced. If there is no voltage, further investigation into the wiper switch or associated wiring is needed.
Why Windshield wipers not working after new wiper motor?
Assuming they did not work with the old wiper motor, check the fuse, check the switch.
How does the wiper circuit work on a 1985 gmc jimmy?
The wiper circuit on a 1985 GMC Jimmy operates using a combination of a switch, a relay, and the wiper motor. When the driver activates the wiper switch, it sends power to the wiper motor through a relay, which may also control the speed settings (low, high, and intermittent). The motor then drives the wiper arms back and forth across the windshield. Additionally, there is a park switch in the motor that ensures the wipers return to a resting position when turned off.
