To change the stock radio on a 2002 Electra Glide, first, remove the outer fairing by unscrewing the bolts that secure it. Once the fairing is off, disconnect the wiring harness from the back of the stock radio and remove it by unscrewing the mounting screws. Install the new radio by reversing the process: connect the wiring harness, secure it with screws, and then reattach the fairing. Make sure to test the new radio before fully reassembling to ensure everything works correctly.
I believe they are 5.25" stock
69 hp
It's about 68 horsepower stock.
The stock rear tire on a 2003 Electra Glide configured for the US market is a D402 MT90B16 74H. I'm not certain if it is the same on thebikes configured for the European market.
to easy call dealer
Hold the Rcl button and use tune/seek to change time
To install a rear lowering kit on a 1995 Electra Glide, start by safely lifting the motorcycle and supporting it on a stable stand. Remove the rear wheel by loosening the axle nut and disconnecting the brake caliper. Next, remove the stock shocks and replace them with the lowering kit components, ensuring all hardware is tightened to the manufacturer's specifications. Finally, reattach the rear wheel and brake caliper, lower the bike, and check for proper alignment and clearance before taking it for a test ride.
Around 200 net hp
if your asking if you can put subwoofers on the stock radio then no you have to have an aftermarket radio
first check your fuse panel located behind ashtray and change fuse if that doesnt work check your code in radio if stock
Stock horsepower 62
700 RPM