answersLogoWhite

0

Amperage is measured by a multimeter. First determine the amperage rating on the multimeter. Next, select the appropriate setting on the tool. The next step is to set the range on the multimeter. Make sure to plug the leads into the appropriate terminals. Run the circuit through the multimeter to measure the current. Turn off the breaker, make sure the AC circuit is turned off, then rewire the circuit.

User Avatar

Wiki User

10y ago

What else can I help you with?

Related Questions

How do you check for amp draw with volt meter on automobile?

you dont you need an ammeter for that


What is your amp draw of a mr16 light with a transformer?

The amp draw of a MR16 light with a transformer can vary depending on the wattage of the light bulb and the efficiency of the transformer. Typically, a 50 watt MR16 halogen bulb with a transformer can draw around 0.42 amps. It is important to check the specifications of your specific MR16 light and transformer to determine the exact amp draw.


What happens to amp draw as static pressure increases?

As your static pressure increases your Amp draw will drop


What if the plug and cord are hot on the air conditioner?

You may have a loose wire somewhere. You need to check the amp draw of the unit.


How can you test a compressor to see if it has shorted?

You would need to put an amp-meter on the circuit to see what the current draw is like. ====== If the compressor is shorted to ground you cannot check the amp draw because it will constantly kill the circuit breaker. A better way to go would be to check the continuity of the compressor to ground and each winding.


What is the maxamin voltage you can draw from a 32 amp socket?

The maximum voltage you can draw from a 32 amp socket depends on the voltage rating of the socket. For example, if it is a standard 240-volt socket, the maximum voltage you can draw is 240 volts. It's important to check the voltage rating of the socket to ensure you are not exceeding its limits.


What would cause your headlights to burn out every 12 months on a 1999 Camry?

check the amp draw , maybe drawing too much amp for some reason , only way u could draw more ampe is when u have more load on the head light circuit


What is the amp rating for?

Total battery amp hours of the battery, divided by the amp draw, equals the life of the battery.Example=200 amp hours, divided by 5 amps, equals 40.00 hours.There are many different factors. This is based on constant draw.


What is the typical amp draw of a ceiling fan?

The typical amp draw of a ceiling fan is around 0.5 to 2.5 amps, depending on the size and model of the fan.


What is the D in Cobra AMP Driver golf?

the D stands for draw version of the amp drivers


Can you use a 230v saw on a 40amp circuit?

Possibly, most 230 volt saws draw about 16-18 amps on each line. There will be a spec plate on or by the motor which has the amp draw marked. CHECK this first.


How you check amp draw on compressor?

Divide the power rating (in watts) by the voltage (in volts). So if you use a 100 watt light bulb in a typical 110 volt lamp then it will draw 100/110 = .91 amps of current. Or plug a 1500 watt electric heater into a 110 volt wall socket and it will draw 1500/110 = 13.6 amps of current.