Ask dell -__-
To cut external threads using hand dies, first select the appropriate die for the desired thread size and pitch. Secure the workpiece in a vise and apply cutting oil for lubrication. Place the die over the end of the workpiece and ensure it is perpendicular; then, turn the die handle clockwise while applying light pressure. Adjust the die using a die stock if necessary, ensuring it is set to cut straight and to the correct depth, checking the fit frequently against a matching nut to ensure proper alignment and thread quality.
Left hand threads and right hand threads differ in the direction in which they are tightened or loosened. Right hand threads are tightened by turning clockwise and loosened by turning counterclockwise, while left hand threads are tightened by turning counterclockwise and loosened by turning clockwise. This difference allows for specific applications where different types of threads are needed for secure fastening.
Left hand threads and right hand threads differ in the direction in which they are tightened or loosened. Right hand threads are the most common and are tightened by turning clockwise and loosened by turning counterclockwise. Left hand threads, on the other hand, are tightened by turning counterclockwise and loosened by turning clockwise. This difference in direction allows left hand threads to be used in specific applications where a reverse tightening direction is needed.
== == == ==
Those are right-hand threads.
Left-hand and right-hand threads differ in the direction in which they tighten. Right-hand threads are tightened by turning clockwise, while left-hand threads are tightened by turning counterclockwise. This difference is important when fastening components together to ensure that the threads align properly and the components are securely attached.
Right hand threads. Right to tighen left to loosen.
they are right hand threads
Land Rover 32mm threaded fans are Left Hand threads, the 36mm threaded fans (which I think you have) are normal/ right hand threads.
Standard right hand thread.
Right hand and left hand threads differ in the direction they tighten or loosen. Right hand threads tighten when turned clockwise and loosen when turned counterclockwise, while left hand threads tighten when turned counterclockwise and loosen when turned clockwise. This difference affects the assembly process because using the wrong type of thread can lead to parts not properly securing or coming loose during operation. It is important to match the correct thread type to ensure a secure and stable assembly.
On all Harleys the transmission mainshaft has lefthand threads. The motor's sprocket shaft has righthand threads.