0
First contact you city water department and find out where they want you to hook in. Once you know that a ditch to the main will be needed, the main and your water line will have to be below the frost line, this depth varies depending on local climate and also local building codes.
If there is already a valve at the main where the city is having you hook up you'll need to run your pipe to it, if not you'll need to have one installed. They have a special valve that hooks onto the pipe and equipment that can drill through the valve while the main is under pressure. You will likely also need to install a shut off valve that can be accessed from "street level" and most communities will require a water meter.
Before the water can be turned on most communities will require an inspection of both the water and sewer Plumbing in the building.
Because local codes and rules vary greatly hooking to the main is probably best left to professionals.
What else can I help you with?
What is the difference between a full hook up vs water electric when camping?
When hook ups are available at campsites there are two options, full and water. Normally the full hook up includes electricity and water, whereas the water hook up does not include electricity.
Where is the water hook up to flush an 89 kawasaki?
where is the water hook up to flush a 89 kawasaki jet ski
Do you have to hook up water line on the dryer?
No
How do you hook up saltwater pump to an intex pool?
how do you hook up the cleaner to salt water pool pump
How do you hook up sewer and water to a bathroom?
To hook up sewer and water to a bathroom, start by installing the drain line for the toilet, ensuring it connects to the main sewer line with proper slope for drainage. Next, connect the sink and shower drain lines to the main drain, using PVC or ABS piping. For water supply, run cold and hot water lines from the main supply to the bathroom fixtures, ensuring to install shut-off valves. Finally, make connections to the fixtures, checking for leaks and ensuring proper water flow.
What type of pipe do you use to hook up a water riser?
water pipe
Are water beds shipped with water in them?
No...you must hook a water hose up to them and fill them with water yourself.
How do you run water underneath mobile home to hook up to ice maker?
The water hose has to start from a main water source. Run this hose underneath the mobile home any way you can until it reaches the ice maker and connects.
How do you hook up a stereo equalizer?
Put the E.Q. between the pre amp and the main amp.
What is a button hook in the well water?
A button hook in well water is a device used to retrieve items that may have fallen into a well, such as tools or objects. It consists of a long handle with a hook at the end that can be lowered into the well to grab and pull up objects.
How do you hook up an ice maker refrigerator in a laundry room Can you use the water hook up for the washing machine by using some kind of line spliter for the cold water line?
Yes, you can use the cold water line for your washing machine to hook up an ice maker refrigerator by using a line splitter. Install a T-fitting or a similar splitter on the cold water supply line, which will allow you to run a separate line to the refrigerator's ice maker. Make sure to use appropriate plumbing connections and ensure that the water pressure is sufficient for both appliances. Additionally, check for any local plumbing codes to ensure compliance.
How do you do the vacuum lines hook up on a 1995 GMC diesel pick up I want to know how they hook up how you hook him up there all disconnected right now and I don't know how to put them back together?
Go to one of your local parts houses and purchase a Haynes Manual that is specific to you truck. It will have the vacuum routing as well a wiring schematic.
