0
First put the gear selector in low gear with vehicle parking brake on. Then pull the hard plastic part of the dash releasing the clips, also put the steering column in the lowest position. Once the dash is lose, lift it up out of the way. then release the clips one on each side of the ac unit control module. Then pull the wire harness off the switch, then the switch from the control module. Put back together in the reverse order.
What else can I help you with?
On a 2006 Chevy silverado is the fan blower resistor attached to the outside of the fan blower housing or is it necessary to remove the housing to locate the resistor?
it is under the glove compartment on the passenger side of the truck
If The air in your truck only works on high do you need a new switch?
possibly a blower motor. or switch
How do you replace the blower motor on 1978 Ford 350 Truck?
Remove the wiring harness from the back of the blower motor. Remove the blower motor retaining screws. Remove the fan from the blower motor. Reverse the process to install the new blower motor.
Where is the fuel inertia switch on a 1995 Chevy Silverado?
There is no inertia switch on the Chevy truck it runs from the ecm , oil pressure switch and relay.
How do you shift a 2000 Chevrolet Silverado Z71 in and out of 4 wheel drive?
have the truck on, put the truck on neutral, then switch from 4wd to 2wd
Does 2001 dodge durango have a blower motor or is it called a blower motor resistor?
Your truck has both. the resistor is between the switch & blower.thje resistor controls the blower speed
Where is the blower motor resistor in a 03 international 9900I semi truck?
In the switch assembly itself.
How do you replace a dimmer switch for a 1987 Chevy truck 4x4?
how do you replace3 dimmer switch 1987 chevy silverado 4 x 4
On a 1996 Chevy silverado will it lower the truck 2 inches if you remove the load spring?
NO it will not.
Where is the blower motor relay switch on a 98 C2500 Chevy truck?
behind the glove compartment, to the left
How do you replace the blower motor on a 93 Chevy truck?
First, take a socket wrench to remove the cover of the blower motor of a 1993 Chevy truck. Then pull the motor blower out and install a new one in its place. Lastly, screw the bolts of the blower motor cover back in.
Why Small omount of a-c air coming out of vents with switch on high on a 96 cheve 7.4 truck?
Could be,The blower speed switch or electrical plug at switch is burned out. The high speed blower relay is burned out. The blower motor is on its way out. The blower motor speed control resister is burned out, The cabin filter (if applicable) is very dirty.
