Just wait long enough and it will fall off like ours did!!! Now I can't find a replacement!,
There a number of bolts through the skid plate into the mounting frame. Just remove them and you got it.
Good luck,
BR
you would have to remove the skid plate on the bottom of the car and it will be on the bottom of the oil pan you would have to remove the skid plate on the bottom of the car and it will be on the bottom of the oil pan
near the 4 corners of the skid plate are 12mm bolts,(one at each corner) remove the bolts and unhook a hook arm (by slightly lifting up on bottom of skid plate) from the center bottom of skid plate and lower skid plate to the ground. skid plate removed. <these directions were done by me to remove the skid plate from my 1994 4runner.>
The skid plate does not have to be removed in order to access and change the filter.
No. The skid plate doesn't have to be removed.
Yes, the skid plate is also the trans mount crossmember.
The 2003 tocoma has a two peice skid plate. Three bolts in the front by the radiator housing and two bolts in rear into the frame with two bolts connecting the two piece skid plate together. remove the rear skid plate first then remoive the front with a rathet. If I remember it is a 10mm bolt for the back piece and a 15? for the front three?
To remove the skid plate from a 2008 Toyota Tundra, first, ensure the vehicle is on a flat surface and safely elevated using jack stands. Locate the bolts securing the skid plate, typically found along the edges and center, and use a socket wrench to remove them. Once all bolts are removed, carefully lower the skid plate from the vehicle. Make sure to keep track of the hardware for reinstallation if needed.
There is a skid plate on the bottom rear of the machine. Remove the skid plate and you can see the drain plug on the bottom of the tank. There is a second drain plug also forward more.
There is a skid plate under the front bumper. Remove the 2 bolts to the cover in the middle of the skid plate, and you will have easy access to the filter.
You have to hold the trans in place to remove the skid plate.
To remove the skid plate on a VW Touareg, first, make sure the vehicle is on a flat surface and securely lifted with jack stands. Locate the bolts or screws securing the skid plate, which are usually found along the edges; use the appropriate socket or wrench to remove them. Once all fasteners are removed, gently lower the skid plate from its position, being mindful of any clips or additional attachments. Always consult the vehicle's manual for specific instructions and torque specifications when reinstalling.
no it does not come with a skid plate