You cant as no one on the internet will tell you
There is a series of screw in studs and you have to remove them all and then bend out the arch liner.
To remove the wheel arch liner in a Peugeot 106 Independence, first, ensure the vehicle is safely elevated and secure. Start by removing any screws or fasteners holding the liner in place, typically found along the edges. You may need to detach clips or bolts that secure the liner to the body of the car, and then gently pull the liner away from the wheel arch. Be cautious not to damage any surrounding components during the removal process.
both washer pumps are under wheel arch liner. drivers side front, remove arch liner bolts,push back liner 3 bolts hold washer bottle,you have to take indcator out to access one of the bolts.other 2 under wheel arch.
In the passenger side wheel arch. You have to remove the wheel & liner to get at the valve.
its in the side of the washer bottle located in front of the offside wheel beyond the plastic wheel arch liner, ideally remove o/s/f wheel & liner 1st :-)
Remove the headlamps and front bumper. Remove the three upper retaining bolts and the wheel arch liner. Remove all the bolts holding the wing in place and remove it.
To change the inner wheel arch liner on a Peugeot 307, first, ensure the vehicle is securely lifted and supported. Remove the wheel for easier access, then unscrew and detach the existing liner using the appropriate tools, typically a socket or screwdriver. Once removed, position the new liner in place, align it with the mounting points, and secure it with screws or clips. Finally, replace the wheel, lower the vehicle, and check for a proper fit.
Remove the left front wheel and remove the securing nuts to the wheel arch(plastic wheel well liner) pull back from the rear and you will see the fuel filter under it.
You have to take of the front grill 3 screws the you have to remove the bumper. Take out wheel arch black liner and then you will see the bolts you have to remove and then unscrew the remaining bolts on the headlamp
under the drivers wheel arch liner, why ?
remove plastic wheel arch liner remove power steering pump you can leave pipes on .then remove p.a.s pump bracket may have to remove water pump pullly and remove alt from top