0
Disconnect your ground cable from the battery,get under the car, remove the wires from the starter and remove the two bolts holding it in. One bolt can be accessed from the top and screws into the engine. It's much easier to reach if you remove the air cleaner and air cleaner tubing. The other must be reached from under the car and bolts into the transmission. You will need about two feet of extensions.
What else can I help you with?
You have to tap the starter to start on a Geo Prizm?
You need a new starter
How do you replace the timing belt on a 1994 Geo Prizm 1.6?
How do you replace the timing belt on a 1994 Geo Prizm 1.6?
How do you replace the water pump in a 93 geo prizm?
See the related question: How do I replace the water pump on a 1993 Geo Prizm 1.8L?
What is the Size of bolts for 93 geo prizm starter?
Look here: How do you change the starter on a 1996 Toyota Corolla?Prizm and Corolla engines are the same.
How do you replace the alternator on a 1994 Geo Prizm?
From under the car.
Why does your starter keep running on a 1995 geo prizm?
The signal for the starter originates from the key switch, I would start there.
How do you replace the backup bulb 1995 geo prizm?
1995 geo trunk lid bulb
How to change a water pump in a 94 geo prizm?
You may find some help by searching for this question.How do i replace the water pump on a 1993 Geo Prizm 1.8L?
How replace a motor mount on a 1997 geo prizm?
Remove the old mount & replace with the new.
How do you replace 94 geo prizm water pump hose?
If you are referring to the water inlet hose on the back of the water pump you can use this question as reference. How do i replace the water pump on a 1993 Geo Prizm 1.8L?
When was Geo Prizm created?
Geo Prizm was created in 1989.
How do you fix a PVC valve on a 1997 geo prizm?
You don't fix it, you replace it.
