0
Remove the starter from the mower. If the broken cord is hanging out of the hole in the starter, it's easy: Slowly pull it out it's full length. Notice the rotating pulley that the cord is wound on. When it's fully extended, use something like a nail to lock the pulley into position. Clip off the inside knot at the rope stop hole, and pull the old rope out, then thread the new rope (same diameter) into the opening, into the pulley, and out the rope stop hole in the pulley where you clipped off the old knot. Tie a new, tight, overhand knot in that end. Hold the rope, remove the nail, and slowly let the spring wind the new rope on, leave several feet of rope hanging out of the rope hole, and cut it to length only after you've reinstalled the handle.
Now, if the rope broke inside the pulley, that's a different story and can be dangerous (there is much spring tension on the coil spring when you disassemble it, even when the rope is inside of it). Might be better to have a pro do that.
What else can I help you with?
How do I replace the Craftsman gas-powered weedwacker starter rope?
go to home depo and buy some
How to replace a Toro weedeater pull string?
To replace the pull string on a Toro weedeater, first ensure the engine is off and cool. Remove the starter cover by unscrewing any screws, then take out the spool containing the old string. Thread a new string through the spool, wind it tightly in the direction indicated, and reassemble the spool into the housing. Finally, reattach the starter cover, and your weedeater will be ready for use.
How do you replace craftsman starter pulley?
To replace a Craftsman starter pulley, first, disconnect the spark plug to ensure safety. Remove the starter assembly by unscrewing it from the engine. Take off the old pulley by detaching any retaining clips or screws, then install the new pulley by reversing the process, ensuring it is securely in place. Finally, reassemble the starter assembly and reconnect the spark plug before testing the starter.
How do you replace pull cord on gbi 22v weedeater blower?
To replace the pull cord on a GBI 22V weedeater blower, first, remove the starter cover by unscrewing the screws holding it in place. Take out the old cord from the starter assembly and measure a new cord to the same length, then thread it through the starter pulley and tie a knot to secure it. Wind the new cord around the pulley, then reattach the starter cover and ensure everything is tightened properly before testing the pull cord.
How do you replace the starter on a craftsman 19.5 horse lawn tractor?
Remove the battery cable on the side of the starter. Then remove the two bolts holding it onto the engine. Once you have your new one just reverse those steps.
Should you replace the brushes on a starter or replace the starter?
replace the starter
How do I line up the right wheel axle and hub to insert a bolt on Craftsman 30 snow blower 536881112?
How do you replace rewind starter on a Sears model #563.884352
How do you replace the Starter in 2003 Toyota Tundra?
I need to replace the starter in a 2003 Tundra, but where is it the starter? I need to replace the starter in a 2003 Tundra, but where is it the starter?
How do you replace the starter 1986 El Camino?
how to replace a starter
Who is the manufacturer of craftsman riding lawn mower?
which 42" Craftsman riding mower is made by Huskvarna
How do you replace starter on 6.0 powerstroke?
How do you replace a starter on 2003 powerstroke
How do you replace starter in Chevy Avalanche?
How do you replace the starter on 2002 chevy avalanch
