0
What else can I help you with?
What is the equivalent in mm of a size 12 drill bit?
It's about 4.8 mm.
What is the recommended drill size for a 12 screw?
The recommended drill size for a 12 screw is 5/32 inches.
What size drill for 12 metal screw?
If you want it to grip, drill a 9/64 hole. For a clearance hole, drill 7/32.
What is the best way to drill holes in the ground using a 12 inch auger bit?
The best way to drill holes in the ground using a 12-inch auger bit is to attach the auger bit to a power drill or an auger machine, position it at the desired location, and slowly apply downward pressure while the bit rotates to create the hole. Make sure to keep the bit clean and sharp for efficient drilling.
What is 12 over 18 eqivalent to?
12/18 = 6/9 = 2/3
What fraction is eqivalent to 2 over 12?
2 over 12 is 1/6.
What is the recommended length for a long pilot drill bit when drilling through thick materials?
The recommended length for a long pilot drill bit when drilling through thick materials is typically 6 to 12 inches.
What is 12 bit microprocessor?
The DEC PDP-8 is a 12 bit computer. A 12 bit computer is one where the accumulator and/or bus size is 12 bits.
What is an 12 bit microprocessor?
The DEC PDP-8 is a 12 bit computer. A 12 bit computer is one where the accumulator and/or bus size is 12 bits.
What size drill bit for 8 gauge screw?
0.31 inchANS 2 - or, in fractions, 5/16 ths
What is 12 over 24 eqivalent to?
12 over 24 is equvilent to one half, 50%, or 0.5
What is the fraction eqivalent to 1.2?
12 over 10 or 6 over 5
