It's about 4.8 mm.
It's just a tiny fraction over 3/16 inch
If you want it to grip, drill a 9/64 hole. For a clearance hole, drill 7/32.
0.31 inchANS 2 - or, in fractions, 5/16 ths
The DEC PDP-8 is a 12 bit computer. A 12 bit computer is one where the accumulator and/or bus size is 12 bits.
The DEC PDP-8 is a 12 bit computer. A 12 bit computer is one where the accumulator and/or bus size is 12 bits.
size 12
Depends on the size, but in general at least 2-3 times the cost of a comparable regular drill. I have a 1 inch diamond holesaw bit that cost $26 -A regular steel one is about 8-9.
An American size L in Australia is equivalent to 16. But this is for American size L that is 12. If it is American size L that is 14, then the equivalent size in Australia is 18.
Italian coat size 46 in UK is a size 12!
The UK equivalent of a size 8 dress in the US is size 12, size 40 European and size 12 Australian. These sizes are just guidelines, actual size will vary depending on designer and the type fabric used.
#4 Screw use a 1/16" Drill #6 Screw use a 3/32" Drill #8 Screw use a 1/8" Drill #10 Screw use a 9/64" Drill #12 Screw use a 11/64" Drill #14 Screw use a 3/16" Drill
A person called a locator steers the drill head, he has a lil box which tells him where the bit is, how many ft deep, and what direction its pointing, 12-12 oclock, and then he tells the driller, and the process goes from there try www.digitrak.com