This is a 2-cycle engine and requires pre-mixing gasoline and 2-cycle oil. Do NOT use automotive oil or 2-cycle outboard engine oil. Mix at the ratio of 40:1 (3.2 oz of oil to 1 gallon of gasoline). I recommend purchasing a 1 gallon gas can, fill it to the "fill" line and there's still enough room to add the 3.2 oz of oil. Make sure you label this gas container and keep it separate from other gas cans so someone doesn't accidentally end up using it as "gas". I also recommend lightly shaking/swirling the closed container after adding the oil so that it mixes well. Always do this prior to filling the weedwacker so that the oil and gas remain mixed consistently.
2 cycle engine are mixed 40 to 1 ratio. One Gal. of gas to 3.2 oz of oil.
2 cycle engine are mixed 40 to 1 ratio. One Gal. of gas to 3.2 oz of oil.
How do you rewind the rope on the moter
Fuel mixture is 16:1
what is the gas/oil mix for the 24cc weed trimmer by craftsman
32 to 1 or 4 oz per gallon
40:1 is the correct mixture for the fuel and 2 cycle oil. 3 oz. of 2 cycle oil per gallon of gas. I have Craftsman Line Trimmer 358.795190 (Model #). It has the quick release shaft for other attachments. Hopefully this will help you.
Craftsman 32cc 2 cycle Split Boom Gas Trimmer are great for easy use and flexibility.
Well, honey, the oil to gas mixture for a S1400 John Deere line trimmer is typically 50:1. That means for every gallon of gas, you add 2.6 ounces of oil. Just make sure you mix it well before fueling up that trimmer, unless you want it to sputter like a broken-down jalopy.
To replace the line on your Ryobi gas trimmer, first remove the spool cover and take out the old line. Cut a new piece of trimmer line to the appropriate length and insert it into the spool. Wind the line evenly and securely onto the spool, then reassemble the trimmer.
Go to Sears.com, then at the top of the page, click on Parts Direct. A box will appear where you can enter the Model #. On the page that comes up, click "View Manual". A .pdf file will open which you can save to your computer.
In the gas no oil is requried but in the crankcase I am guessing a good 30 weigt non-detergent oil would do the trick.