answersLogoWhite

0

The P1810 code indicates a problem with the transmission pressure control, often related to the transmission control module (TCM) or issues within the valve body. This may cause the transmission to get stuck in lower gears, preventing shifts to 3rd or 4th gear. To resolve the issue, check the Transmission Fluid level and condition, inspect the TCM and wiring for faults, and consider having the valve body evaluated for any blockages or mechanical failures. If the problem persists, consulting a professional mechanic for further diagnostics is recommended.

User Avatar

AnswerBot

1mo ago

What else can I help you with?

Related Questions

Is it possible to tow a Daewoo Lanos with a Daewoo Lanos?

Yes it is. Every vehicle is designed to tow at least 1 times its own weight.


Your ac does not work on 1st 2nd or 3rd only on 4 but does not blow cool air what might be the problem Daewoo Lanos 2000?

ck for a resistor gone bad. alot of times when a fan switch only works on high, it is the resistor.


How do you bleed rear brakes on a Daewoo Lanos se?

To bleed the rear brakes on a Daewoo Lanos SE, start by ensuring the brake fluid reservoir is filled. Begin with the wheel farthest from the master cylinder, usually the right rear, and have an assistant pump the brake pedal several times before holding it down. Use a brake bleeder tool or a wrench to open the bleeder valve, allowing fluid and air to escape until you see a steady stream of fluid. Close the valve, have your assistant release the pedal, and repeat the process for the left rear brake. Always check the fluid level and top it off as needed.


What are break times for an 8 hour shift?

what are break times for an 8 shift what are break times for an 8 hour shift in indiana


How do you test a fuel pump in a Daewoo Lanos?

Same as any newer car. Step 1, swap relay for one next to it that matches model #, driver side, under hood. If that doesn't work, With an ear at fuel tank, turn on key. You should hear it. If not, that's a great start, 99 out of 100 times it is the fuel pump failed.


What was a shift?

a shift in medieval times is underwear that girls wore under their dresses


How can I find the radio code of a Daewoo?

Search the web. I once found the codes on the web for all the Daewoo radios. You just have to try each one until it works. code on top of radio pull out There also should be a card with the owners manual that would say the code. I have a 2000 Lanos and the code for its radio is 6361. i don't know if they use they same code for all of them but it wouldn't hurt to try I got my Lanos without a manual, and when the battery died I had to guess the code. The good news is that unlike other cars, Lanos' radio doesn't lock if you guess incorrectly. you need to try 6*6*6*6=1296 times at the most. In average it will take you about 30 minutes. My code was 1656, so it wasn't too bad to find it.


How many times the transmission shift in a 1990 honda accord?

It is a 4 speed automatic. Therefore it will shift 3 times. It will shift from 1st to 2nd, 2nd to 3rd, and 3rd to 4th.


How to you enter in a code for the car stereo on a 2000 Daewoo Lanos?

If needed, disconnect the battery for a minute, so when the key is turned on and the radio power button (left knob) is pushed, the display flashes code. Enter the radio lock code with the preset buttons representing the numbers. It will flash 3 times and unlock. If you don't have the code, see the more popular answer above this for the most common codes


Why has 2000 Daewoo Lanos has lost power especially up a hill?

I had the same problem. I changed the cam shaft sensor,oxygen sensor,used "sea foam",replaced spark plugs and had it diagnosed dozens of times only to find out it was the head gasket was blown. I had no water/oil mixture,so I overlooked it. A last ditch effort to check the lifters revealed the problem. Hope this help ya.


How many times should the transmission shift on a 1993 Honda accord 4 cylinder?

It is a 4 speed automatic. Therefore it will shift 3 times. It will shift from 1st to 2nd, 2nd to 3rd, and 3rd to 4th.


How do you bleed the power steering on a Daewoo Lanos after a timing belt has been changed?

First top up the power steering fluid, then with the engine running, turn steering slowly all the way to the left, and then, still slowly, all the way to the right. Check that power steering fluid level hasn't dropped, and top if necessary. Repeat the process half a dozen times and you should be good to go. Cheers.