It could be a uneven brake pad due to a warped rotor or it could be a missing spring between the two brake pads that holds them together or a missing noise surpressor between the caliper and the brake pad.
what is the bleeding sequence on rear brakes for a 2001 Honda prelude
sounds like the right front motor mount .i replaced mine and the clunking sound went away
it uses the same for the hydraulic clutch as it does for the brakes.
could be the master cylinder. or the calipers may be siezed
In that year, only EX model comes with ABS brake.
ANSWER: THERE ARE 2 TYPES 1. THE FRONT BRAKES ARE USUALLY THE DISC TYPE 2. THE REAR BRAKES ARE DRUM TYPE HOPE THIS ANSWERS YOUR INQUIRY--SAINTJINO
A bad ball joint or tie rod end.
To tighten the brakes on a 2001 Honda Rancher 350 ES, start by locating the brake adjustment screw, typically found near the brake lever or pedal. Use a wrench or a screwdriver, depending on the type of adjustment mechanism, to turn the screw clockwise to increase tension. Ensure the brakes engage properly without dragging, and test the brakes after adjustments. If issues persist, consider checking the brake pads and cables for wear or damage.
cv joints
because this type of motor cycle can not stand d sudden full brakes at once
What is a wheel oil change???
A 1996 camaro has the same DISK brakes as a 2001. It does not have drum brakes.