0
You can put another Mazda truck engine in place of the original.Now it does not matter if it is out of a automatic or manual transmission truck.The 1986-1993 are interchangeable.The things that do matter is if the truck is has a b2200 or b2600 it has a different ecm (electronic control module) the computer which is made specifically to run with those engines due to sensor and if it is carburetor and or fuel injected.So if you want to upgrade the engine to the b2200 the engine harness going to the ecm may be different but NOT sure (myself) on this .However if you do go with the newer engine it will require the ecm for a b2200 truck .I suggest checking with a local Mazda dealer to see if the harness is compatible it probably is but checking is a good idea.There is not much difference in the b2000 to b2200 in terms of basics the only real difference is cubic inches the 2000 is 1998 cu and the 2200 is 2184 cu.Unless someone else has knowledge other wise this is my suggestion.Hope this helps and if I left something off or incorrect may others correct my post.
What else can I help you with?
What is the engine oil capacity for an 1986 Mazda B2000?
The engine oil capacity for a 1986 Mazda B2000 is 4.1 quarts.
What engine oil you use on a Mazda B2000?
Need to know what year.
What is a Mazda B20?
It is a triple rotor Rotary engine. A b2000 was there pickup.
What is the spark plug gap for a 1985 B2000 Mazda 2.0 liter engine?
The spark plug gap for a 1985 B2000 Mazda with a 2.0 liter engine is .8 mm. This is equal to .031 inches.
Is a 1988 Mazda B2000 a 4 cylinder?
Yes, a Mazda B2000 is most definitely a 4-cylinder with a 2.0L engine. However, technically Mazda didn't produce the B2000 as a 1988 model. It was made in 1986-1987. Then in 1989 Mazda made the B2200 Pickup, which is a 2.2L 4 cylinder.
What is the valve gap on a 1987 Mazda B2000 engine?
.012 int.-.012ex.
How do you remove the head and replace a head gasket on an 1984 Mazda B2000?
take it to a pro
Where is the engine temperature sensor located on 1986 Mazda b2000 truck?
under the termostat housing.
Which Mazda cars can you flat tow?
mazda b2000
Should I replace Mazda engine or buy new car?
Replace the Mazda engine.
Where is water thermo valve on 87 Mazda b2000?
On the 1987 Mazda B2000, the water thermo valve, also known as the thermostat, is located in the engine's coolant housing. To access it, you'll need to remove the upper radiator hose connected to the thermostat housing, which is typically situated near the engine block. Once the housing is removed, you can replace the thermostat inside. Be sure to check for any coolant leaks after reassembly.
What carburetor is on a 1986 Mazda b2000?
I believe the carburetor is a Mikuni. I have a 1986 B2000 myself.
