yes
Yes, you can swap a B20 engine into a 1992 Acura Integra LS with a 5-speed manual transmission, provided you transfer the necessary components from the B18, such as the intake manifold, wiring harness, and ECU. Ensure that the B20 is compatible with the existing transmission and that you address any differences in mounting points or sensors. Additionally, you may need to adjust or tune the ECU for optimal performance. Overall, it’s a feasible swap with the right preparation and parts.
Yes, you can swap a B20 engine into a 1991 Acura Integra LS with a manual transmission. The B20, commonly from the Honda CR-V, can fit into the Integra's engine bay with some modifications, including adapting the engine mounts and wiring harness. You'll also need to ensure compatibility with the transmission and possibly modify the intake and exhaust systems. Overall, while it’s a feasible swap, it requires careful planning and some mechanical skills.
Yes, you can swap a B20 engine into a 1992 Acura Integra LS relatively easily, as both are part of Honda's B-series engine family. However, you might need to address compatibility issues with the engine mounts, wiring harness, and possibly the ECU. Additionally, ensure that you have the right transmission and consider any necessary modifications to optimize performance. Overall, while it's a feasible swap, some customization may be required for a smooth installation.
Yes, a B20 engine can be swapped into a 1992 Integra LS with a 5-speed manual transmission, especially since the B20 shares many components with the B18. You will need to transfer certain parts from your B18, such as the intake manifold, throttle body, and possibly the ECU, to ensure compatibility. However, make sure to address any differences in wiring and engine mounts that may arise during the swap. Overall, with the right preparations and modifications, it should be a straightforward process.
yes you can, just need to change intake manifold and think the driver side mount on the motor. wire harness should plug right in.
almost every integra has some type of B-series engine rangine from b16 b17 b18a b18b b18c b20....... internal and external differences but the head and blocks are almost identical or cna be modded to swap from one to the other i jsut swapaed a b18a for a b18b into my 91 integra
In the fuel tank.
Yes. The 91 ls came with a b18 and that engine shares it's block with the b20. The new engine will drop in, but you will have to swap out some of the parts off of your old engine such as intake manifold, distributer, fuel rail, etc. The only modification you will need will be to extend the temp sensor wires to reach the new location by the thermostat housing as your old sensor is on the rear of the block. You can use your old motor mounts, transmission, harness, belt etc. on the new engine, and any bolt on modifications for the original engine will fit the b20 as well. The transmission bolts right up with no problems.
Custom mounts and a little bit of fab work it will be tricky but is totaly possible
LS engine
i need to find the dip stick for a transmission for 91 integra ls
nop