To adjust the idle on a Datsun, first ensure the engine is at operating temperature. Locate the idle adjustment screw on the carburetor, typically found on the side or front. Turn the screw clockwise to increase idle speed and counterclockwise to decrease it. After adjustments, check the RPM using a tachometer and fine-tune as needed for smooth idling.
Idle is computer controlled, no adjustment screw.Idle is computer controlled, no adjustment screw.
There is no adjustment screw, idle is automatically controlled by the pcm.
choke idle adjustment on 1988 Buick Riviera
Sounds to me like the clutch is shot, assuming it is a standard shift.
The idle adjustment screw is located on the IACV behind the manifold on a 1998 Honda CR-V. Open the latch on the IACV then take an screwdriver and tighten the adjustment screw.
there is no idle adjustment on the neons it controlled by the computer wich opens and closes the idle air control motor located on or near the intake
The IDLE is controlled by the computer. THERE IS NO ADJUSTMENT.
You can adjust the idle on your Polaris 90 by turning the adjustment screw on the side of the fuel pump. Turn the adjustment screw to the left to increase the idle speed.
There is an idle adjustment at the carb. Look where the accelerator pulls the butterfly stop and you will see an adjustment screw.
There is an idle adjustment and a air to fuel adjustment
there should be an idle adjustment on the right side of it
Idle is computer controlled and is not adjustable.