0
What else can I help you with?
Where is the Egr valve on 94 Acura Integra?
I was informed by carl a tech at honaccurate, a reputable shop in boulder,CO that 94 acura integra does not have an EGR valve.
How do you unstick an egr valve in a 1998 Acura Integra?
that is not safe for you engine go buy a new one.
Where do you find the EGR on a 1990 Acura Integra?
== == == == == == == == I have a 1991 and the Haynes manual only shows the removal/installation of the EGR valve on the Legend models. What I find odd though is that there is an EGR part for the 90 - 93 Integra and it's not cheap. The only thing that the manual says is that you should refer to your VECI label located under the hood to see if your vehicle has an EGR valve. All other illustrations are shown from a Legend.
How do you clean 1993 Acura Integra egr?
To clean the EGR (Exhaust Gas Recirculation) valve on a 1993 Acura Integra, first, ensure the engine is cool and disconnect the negative battery cable. Remove the EGR valve from its mounting by unbolting it and carefully detach any connected vacuum hoses or electrical connectors. Use a carburetor or throttle body cleaner and a soft brush or rag to remove carbon buildup from the valve and ports. Reinstall the EGR valve, reconnect everything, and start the engine to ensure proper operation.
Does a 95 integra have an egr valve?
no they dont. the older ones did.
Where is the EGR valve on 1991 integra?
The EGR valve is located on the intake manifold right at the rear passenger side corner of the cylinder head. It has both vacuum and electrical connections to it. Also identifiable as having a long vacuum hose running from the EGR valve directly to the EGR control unit which is a large black box mounted to the firewall behind the ABS pump.
What is 401 acura code on 98 2.5 tl?
That's your EGR valve flow is insufficient. Replace the EGR valve.
Where is the egr valve located on the 1990 acura legend 2.7 v6?
the EGR valve is just under the distributor cap
How long can you drive before getting your egr valve repaired on 1999 Acura CL?
How long can you drive before getting your egr valve repaired on 1999 acura cl?
Where is the EGR valve on a 1991 Geo Metro?
The 1991 Geo Metro EGR valve can be located on the air cleaner housing. The valve will be on the back of the housing.
How do you replace the egr valve on a 1999 acura 3.2 tl?
To replace the EGR valve on a 1999 Acura 3.2 TL, first, ensure the engine is cool and disconnect the negative battery terminal. Remove the EGR pipe and the two bolts securing the EGR valve to the intake manifold. Install the new EGR valve, reattach the bolts, and reconnect the EGR pipe. Finally, reconnect the battery terminal and start the engine to check for leaks.
Location of egr valve Honda accord ex 1991?
The EGR valve for a Honda EX 1991 is at the top of the engine. It is at the front, just to the left of center.
