To clean the EGR (Exhaust Gas Recirculation) valve on a 1993 Acura Integra, first, ensure the engine is cool and disconnect the negative battery cable. Remove the EGR valve from its mounting by unbolting it and carefully detach any connected vacuum hoses or electrical connectors. Use a carburetor or throttle body cleaner and a soft brush or rag to remove carbon buildup from the valve and ports. Reinstall the EGR valve, reconnect everything, and start the engine to ensure proper operation.
I was informed by carl a tech at honaccurate, a reputable shop in boulder,CO that 94 acura integra does not have an EGR valve.
no the do not but some gaskets kits will come wit a egr gasket
that is not safe for you engine go buy a new one.
== == == == == == == == I have a 1991 and the Haynes manual only shows the removal/installation of the EGR valve on the Legend models. What I find odd though is that there is an EGR part for the 90 - 93 Integra and it's not cheap. The only thing that the manual says is that you should refer to your VECI label located under the hood to see if your vehicle has an EGR valve. All other illustrations are shown from a Legend.
no they dont. the older ones did.
Sounds like it is your EGR Valve (Exhaust Gas Recirculation). There are clean kits for these valves. When the EGR Valve is going bad your engine rpms will sometimes vary as much as 1 gran up and down. At least it does it on my 91 Acura Integra RS 5-Speed. New they are anywhere from $157 - $225. Pretty easy to replace. Most of the kids I know that have the B18A engine replaced the EGR with a Delete kit. I have not been able to find one yet. The worst part is when the engine stalls it is sometimes hard to restart unless it sits for about 5 minutes and other thing I hated when you are on a hill sometimes would stall out.... Hope this has helped you Pat Wilke
How long can you drive before getting your egr valve repaired on 1999 acura cl?
No, the 1993 needs EGRNo, the 1993 needs EGR
Not directly, the 1993 had EGR and the 1997 did not.Not directly, the 1993 had EGR and the 1997 did not.
Egr code
To clean the EGR valve on a 1998 Acura RL, first, ensure the engine is cool and disconnect the negative battery terminal. Remove the EGR valve by unscrewing the mounting bolts and gently detaching any electrical connectors and vacuum hoses. Clean the valve using a throttle body or carburetor cleaner, scrubbing with a brush to remove carbon buildup, and then reassemble the valve, ensuring all connections are secure. Finally, reconnect the battery and test the engine for proper operation.
how do you clean a egr valve on a vauxhall zafira 1.6