0
What else can I help you with?
How do you replace valve seals in 1994 3000GT?
remove heads seal oil drain so seals dont fall in. then loosen and remove seals. replace and put engine back together. may need special mitsu. tools
Do you have to remove the heads to replace cam on a 5.3 gm engine?
Yes u do to remove the lifters
How do you replace the valves in a Chevy 350 engine?
this is a mechanics job you have to remove inlet manifold,exhaust manifolds,and then remove heads to replace the valves
Do you have to remove the heads on a 99 GM 5.3 liter to replace the lifters?
Yes.
How do you replace lifters on a 5.3 vortec?
You have to remove the engine cylinder heads to get to the lifters on the 5.3.
How do you Replace valves in super beetle motor?
Pull the engine. Remove the heads. Take the heads and money to a machinist because he needs to refinish the valve seats. He can also test your heads for cracks, and if he finds any you need to replace the head.
How do you replace Chevy 454 head gaskets?
Remove carburator then intake manifold then cylinder heads
What causes antifreeze to come out of your valve cover gasket?
You have a blown head gasket. Remove the heads and replace the gaskets. Also have the heads inspected for cracks.
How do you replace the valve lifters on a cavalier?
To replace the valve lifters on a Cavalier, remove the intake manifold, valve covers and rocker arms. Remove the heads of the lifters using needle-nose pliers.
How do i remove distributor cap that has strip screw heads?
Remove and mark wires Break with a hammer Use vise grips to remove screws Replace with new one
How do you replace the lifters and pushrods on a Chevy vortec 350?
Take off valve covers, heads an intake manifold with throttle body, pull out lifters and pushrods and simply replace It's not necessary to remove the heads for this procedure.
How do you repair head gasket?
You cannot repair a blown head gasket, you must remove the heads and replace the gasket.
