0
I'm assuming your question is asking how to take off the door panel of a Mazda Protege.
That answer is simple. There is a screw behind door handle opener. Unscrew it. There are two screws under the door handle. Lift it off and unscrew them. When you open the door, you will see a cap, take this off. There is also another cap on the side of the door panel, tear this off and say goodbye to it. There may be more hidden screws, but I don't remember. Lift the door upwards to unhatch it from the top. Slowly start to pull it off, but not all the way. Unhook the electrical stuff, then you're good.
What else can I help you with?
How do you repair a door on a 1998 Mazda Protege?
get a manual
How do you remove the front door panel on a 2002 Mazda Protege sedan?
To remove the front door panel on a 2002 Mazda Protege sedan, start by disconnecting the negative battery cable for safety. Use a flat-head screwdriver or a trim removal tool to carefully pry off the plastic cover behind the door handle and remove the screws underneath. Then, remove any screws securing the door panel along the bottom and sides. Finally, gently pull the panel away from the door, releasing any clips, and disconnect the electrical connectors if necessary.
How do you replace a 1999 Mazda protege Door Lock Actuator?
We have a 2002 Protege so I assume it is similar to yours. 1) Carefully remove the Door Panel 2) Unscrew and remove the Door Lock mechanism 3) Now simply separate the Door Lock Actuator from the Door Lock (The Door Lock Actuator is the part with the wires coming out of it.) Installation is the reverse. Have Fun!
Is a 98 Mazda 626 fuel door the same size as a 98 Mazda Protege fuel door?
Hi! The fuel doors are not the same size.
Interior door handle for Mazda Protege?
If you're looking to replace the interior door handle for a Mazda Protege, it's important to ensure you have the correct model year, as designs may vary. You can find replacement handles at automotive parts stores, online retailers, or through a Mazda dealership. Installation typically involves removing the door panel to access the handle mechanism, which can often be done with basic tools. Always consult your vehicle’s service manual for specific instructions and compatibility.
What is the tire size for a 2000 Mazda Protege?
Look in your owner's manual and on the driver's door post.
How do you remove rear door handle on 2002 Mazda Protege?
To remove the rear door handle on a 2002 Mazda Protege, first, ensure the door is open and then remove the interior door panel by unscrewing any visible screws and gently prying it off with a trim tool. Next, locate the handle's mounting screws, usually found inside the door cavity, and remove them. Disconnect any linkage or wiring attached to the handle, then carefully pull the handle out from the exterior side of the door. Reassemble in reverse order after replacing or repairing as needed.
Where is the fuse box on a 2002 Mazda protege lx?
it should be on the left side of the dash when you open the door
How do you remove the door panel off the driver side door of your Mazda 6 2006 with the door closed?
Nobody knows.. Or they wont tell you... Have to take it to the mazda dealer...
Why does my 2003 Mazda protege beep when door is open?
The car beeps to let you know your door is open so you don't drive away while your door is open or ajar
What size for 2001 Mazda Protege tires?
195 55 r15 you can also check the labelling on the drivers door for this info
How do you remove the rear door speakers on a 2003 Mazda 6?
remove door panel, remove speeker.
