0
To program a 2005 Hyundai XG350L keyless remote, first, sit inside the vehicle and close all doors. Insert the key into the ignition and turn it to the "On" position (not starting the engine) and back to "Off" five times within 10 seconds. After the fifth turn, the locks should cycle, indicating the vehicle is in programming mode. Press the "Lock" button on the remote you want to program; the locks will cycle again to confirm. Repeat for additional remotes if needed, then turn the ignition to "On" to exit programming mode.
What else can I help you with?
Does a Hyundai xg350L have struct or shocks?
shocks
How good is a 2002 XG350L Hyundai?
Pretty darn good.
How do you reset alarm in 2002 Hyundai XG350L?
disconnect battery
How do you fix an electrical problem in a Hyundai XG350L all interior light are blinking?
I have a 2004 XG350L doing the same thing. Turns out it was a bad interior dimmer switch.
How do you bleed brakes on a 2003 Hyundai xg350l?
how do i bleed brakes on a 2003 hyunia xg350
How do you replace the headlight bulk on a 2004 Hyundai 2004 XG350L?
How do you change a headlight bulb on 1 2004 Hyundai XG 350?
How do you remove the inside left front door panel on a Hyundai XG350L?
you allow your bait car
Crankshaft sensor on a Hyundai xg350l?
it is located under the timing cover above the crankshaft pulley
What Oil wt for 2003 Hyundai xg350l?
always use 5x30
Where is the input speed sensor 2004 Hyundai xg350l?
under the air box on the center of the bell housing
Where is obd2 connector on 2005 Hyundai xg350L?
The OBD-II connector on a 2005 Hyundai XG350L is typically located under the dashboard, near the driver's seat. You can find it to the left of the steering column, just above the pedals. It may be necessary to remove a cover or panel to access it easily.
On a 2002 Hyundai xg350l where is the tcs and tcm located the lights keeps coming on?
On your left next to the cruise button
