To remove the shift knob from a Honda Rancher, first, ensure the vehicle is in neutral and the ignition is off. Locate the set screw on the side of the knob, usually accessed by lifting a rubber boot if applicable. Use an appropriate tool, like an Allen wrench or screwdriver, to loosen and remove the set screw, then gently pull the shift knob off the lever. If it's stuck, wiggling it slightly while pulling can help.
you have to take the center console loose and raise it over the top of the shift knob. there you will finrd that the shift bag is attached to the shift knob by a zip tie. break the zip tie and unscrew the shift knob. that's it.
Try twisting it and then get a manual for it. Try Chiltons or Haynes.
To remove the gear shift knob on the SLK 320, first pry the cover from the gear shift knob. Then, use a screwdriver to remove the screw in the center of the knob. This will then allow the knob to be removed.
To remove the gear shift knob on the '03 Silverado, first pry off the cover that has the shift pattern on it. Then, remove the screw that is under that cover to remove the knob.
How do you remove the gear shift knob on a 2000 Daewoo Lanos?
First remove the shift knob pattern (it can be pried out with a small screw driver). Next remove the alignment pin with a pair of pliers. Then the shift knob can be unscrewed.
To remove the console shift knob on the AT 1993 Olds Achieva, first pry the cover from the top of the shift knob. Then, access the single screw inside the cover of the shift knob and turn it counter-clockwise to release the knob.
pull the shift boot down. loosen the jam nut under the shift knob then unscrew the shift knob.
You should be able to depress the sides of the silver ring to remove the boot. After this is done just unscrew the knob. The new one can then be threaded.
You simply unscrew the bottom "ring" of the shift knob and then lift the knob portion upwards.
There is a staple on the front of the gearshift just below the knob, remove it and lift the shift knob.
start by pulling down while twisting on the small black plastic piece under the knob. Once that is off, you can begin untwisting the shift knob until it comes off. Twist on your new knob to your satisfaction and pop the black piece back on, and your golden.