I just did it on my rav4 built date 5/2002 yesterday.
go to:
http://media.Photobucket.com/image/2002%20toyota%20rav4%20serpentine%20belt%20diagram/JustAnotherAsian/cars/my%20car/serpentinebelt.jpg
and / or go to:
http://www.Google.com.au/imgres?imgurl=http://www.2carpros.com/forum/automotive_pictures/261618_Noname_185.jpg&imgrefurl=http://www.2carpros.com/forum/2001-Toyota-rav4-serpentine-belt-replacement-vt248568.html&h=275&w=450&sz=32&tbnid=omlVUyXyIEzzhM:&tbnh=78&tbnw=127&prev=/images%3Fq%3D2002%2Btoyota%2Brav4%2Bserpentine%2Bbelt%2Bdiagram&hl=en&usg=__AUb2lFQ9wOB9JPvXhgs00E8BGmE=&ei=5UX3SuixDYaIkAXnwIm5BA&sa=X&oi=image_result&resnum=1&ct=image&ved=0CA8Q9QEwAA
2 people would be better to do the job.
Ask someone to turn the tensioner bolt (see diagrams from web pages above), clockwise direction (about 45 degree) by using 19mm socket and breaker bar (with longer extension, if possible).
This can be done from above the engine, as shown on the diagrams.
Then you can slip the belt off the pulley. (from underneath the car)
(of course you will need to remove the splash shield first)
Installation is the reverse of removal. Be sure to follow the belt routing diagram.
Good luck!!
Note. I did not touch/loose any other bolts.(as explained in other forums).
Just turn the 19mm tensioner bolt (clockwise direction) to compress the spring inside the "Automatic belt tensioner"
The car has an Automatic Belt Tensioner.
go to: http://www.rockauto.com/catalog/moreinfo.php?pk=960351 ( to see pic)
Need a serpentine belt routing diagram for a 2002 Toyota rav4.
The serpentine belt on a 2003 Toyota Rav4 can be loosened by turning the retaining bolt on the idler pulley. The belt can then be shifted inward to loosen.
When you look at the grooved side of the belt and you see a lot of cracks or chunks missing going across the face of the belt.
You don't. The 2007 Toyota Rav4 uses a chain and not a belt.
You should change the belt when it is about to wear out, which a mechanic should be able to tell you when you need to, or you can also change it more often to make sure you wont need to.
How do I change the front breaks on my 2002 Toyota RAV4?
chain.
To replace the serpentine belt on a 2008 RAV4, first, ensure the engine is off and cool. Locate the tensioner pulley and use a wrench to relieve tension on the belt, then slide the belt off the pulleys. Install the new belt by routing it according to the belt diagram typically found on a label under the hood, then release the tensioner to secure the belt in place. Finally, double-check the belt alignment and ensure it is seated properly on all pulleys before starting the engine.
you go to a mechanic and change*
The 2001 to 2004 2.0L RAV4 all models do not need timing belt change due it doesn't have one, it have a chain that not need replacement only if it breaks (hardly). hope this help.
I believe that is 90,000 miles
According to your owner's manual under normal conditions, you should change your timing belt at 100000 KM.