1) Unscrew the shift Knob (counterclockwise) 2) Reach down into the inside base of the shif boot with your fingers pushing out from two sides and simply pull the boot and its associated plastic liner straight out. Its pops out very easily. 3) Turn the boot inside out Presumably the objective is to replace the old synthetic boot. 4) There is a tie wrap at the top of the boot. Just clip the tie wrap off so the plastic bushing at the top is free. 5) Unwrap the bottom of the boot from the plastic base 6) Install a replacement boot using a new tie wrap. 7) Wrap the new boot around the plastic base and snap the assembly back into place. (You may want to lubricate the linkage while you're at it.)
http://www.stealth316.com/2-antenna.htm
3000gt Mitsubishi 1992 is jumping out of reverse
Mitsubishi 3000GT
http://www.stealth316.com/2-ignitionsystem.htm
the 3000gt yes as long as both either manual or auto but cant interchange
turn signal relay fuse
or you could just change your high compresion pistons to low compresion ones and buy a t5 turbo
ABout 161 hp out of the factory with mods such as exhaust headers and wide pipe with cold air intake its about 218.
engine oil capacity is 4.3 liter including 0.3liter in oil filter. 1990 - 1994 models GTO
You can find the fuse box diagram for a 1992 Mitsubishi 3000GT in the owner's manual, which typically includes detailed diagrams and descriptions of the fuse layout. Additionally, many online automotive forums, websites dedicated to Mitsubishi vehicles, and repair manuals like Haynes or Chilton may provide this information. You can also check under the fuse box cover itself, as some vehicles have the diagram printed there.
YES.
I have a 1993 Mitsubishi 3000gt and the TCU is located under the console / dash. It is mounted by a metal bracket to the floor pan. You will need to remove the side carpet panels and the entire front console to access the TCU.