Google it. There's a complete DIY guide with pictures on how to do it.
Quick rundown:
1. (Optional) Lift the front of the G35 and place it on jack stands. Remove both front wheels, place them under the car if you don't have jack stands.
-If you don't do this then turn your wheels to which direction giving you more space to fit your arm through the fender-
2. Remove fender lining using a flathead screw driver.
3. Stick your arm through and make your way up to the headlight and blindly feel for the bulb. Once you find it, un-plug it as you would on a normal car and remove the bulb as you retract your arm.
4. Do the same thing to put in a new bulb being very cautious as to not damaging the new bulb on anything.
5. Repeat on opposite side if necessary.
6. Reverse the removal of everything to complete.
How do you change a fog light bulb on a 2004 VW Passat?
Remove the fog light retaining bolt. Remove the fog light wiring harness. The fog light will come out. Reverse the process to install the new fog light.
How you change fog lights bulbs on a 2004 Toyota Corolla
Remove the three 10 mm bolts on the fog light housing.Now the fog light is ready to remove from the bumper.Unplug the fog light and replace it with a the new one.An instructional video of this process has been included below.
from inside the hood, not hard but it is complicated.
To replace a fog light casting on a 2006 Infiniti M35, first, ensure the vehicle is turned off and parked on a level surface. Remove the underbody panel or any necessary components to access the fog light assembly. Disconnect the electrical connector, unbolt the fog light from its housing, and replace it with a new unit. Finally, reassemble any removed parts and test the fog light to ensure proper functionality.
To change the rear fog light on a 2004 Vauxhall Corsa Life, first, ensure the vehicle is parked safely and the ignition is off. Open the boot and locate the rear light cluster; you may need to remove the access panel or screws to reach the fog light assembly. Disconnect the wiring harness and twist the fog light bulb socket counterclockwise to remove it. Replace the old bulb with a new one, reassemble everything, and test the fog light before closing the access panel.
'How do you change a fog light in a 1996 Pontiac Bonneville? ... How do you
To change the housing fog lights on a 2004 Toyota Tundra, first, ensure the vehicle is turned off and the keys are removed. Access the fog light assembly by removing the screws or clips securing the cover. Disconnect the wiring harness from the old fog light and replace it with the new one, then reassemble the cover and secure it back into place. Finally, test the new fog lights to ensure they are functioning properly.
There is one screw that holds the fog light it into place.Unscrew that screw and the fog light will pull out of the bumper.
how do you replace a bulb in a fog light on a 2000 maxima?
How do you change the fog light on a 2005 Chevy Equinox?