answersLogoWhite

0

If your car requires a rather large gap you might use a coin to check the gap. Check the thickness of coins in your country and if any of them match or are close to the gap required for your car you're in luck.

User Avatar

Wiki User

13y ago

What else can I help you with?

Related Questions

What is the spark plug gap on a Peugeot 405?

0.9MM with spark plug gap tool.


How do you set spark plug wires on a '97 Dodge Intrepid?

With a Spark plug gap tool :)


How do you estimate 030 spark plug gap?

With a spark plug gap gauge.


How do you use a spark plug gap tool?

To use a spark plug gap tool, first remove the spark plug from the engine and clean it if necessary. Insert the spark plug into the tool, aligning the gap between the center and ground electrode with the gauge. Adjust the gap by gently bending the ground electrode with the tool until it matches the manufacturer's specifications. Finally, recheck the gap to ensure accuracy before reinstalling the spark plug.


In a 2008 Polaris Sportsman 500 EFI where is the spark plug located?

Take the seat off , then the right side cover . The spark plug will be behind the ground cable on top of the motor . Should be a special spark plug tool in your tool kit .


1999 mercury villager broken spark plug removal?

There is a tool made for that specific problem. Check with your local parts house.


How do you adjust the gap of a spark plug?

with a spark plug gap tool buy one for 3 bucks at auto parts store


What tool removes spark plugs off 1997 Mercury Villager?

A spark plug socket.


How do you know if the spark plugs are gaped correctly?

you will need to get a spark plug tool and check them before you install them in your car, if you buy them from a parts house sometimes they come pre gaped for your car


What is the spark plug gap for 86 Mazda B2000?

0.031 thousandths with spark plug gap tool or just plain 31 as I go by.


What tool is used to change spark plugs for a 02 dodge neon?

5/8 inch spark plug socket.5/8 inch spark plug socket.


How do i take off the spark plug for 660 raptor?

The best way is to use the spark plug socket out of the factory tool kit. If you do not have that use a normal 5/8" socket to loosen the spark plug. Use the spark plug wire to snap back on after the plug is loose and pull it out. The spark plug is at the very top of the engine, the spark plug wire is a real good indicator of its location.

Trending Questions
How do you bypass imobiliser on Nissan pulsar? What does it mean when the s is flashing green on the 1991 Honda Accord instrument panel? Why would the brake lights on a 2001 Isuzu Rodeo not work only when the headlights are on? What is the torque of the 2009 Honda Rancher AT 420? How do you replace a side view mirror on a 2003 Hyundai Accent? Where is the fuel filter located on a 1989 Honda Accord LX? How do you change the air filter of a 1991 Nissan Stanza? What ground clearance does the 2012 Toyota Corolla have? Where is the subwoofer amp in a 2003 Hyundai tiburon gt? How do you change a heater core on a 2002 Toyota Tundra? How do you remove airlock from cooling system subaru impreza? How do you change front struts on 2000 Nissan Quest? Which car is faster Mitsubishi Magna or Mitsubishi Lancer? When should you change the timing belt in your 2002 Accord EX? Why does the low oil light on your 2001 buick regal come on then goes out after restart. Fixes that did not work. Replaced oil filter. Replaced oil level sensor.? Is a 1994 Mitsubishi mighty max 2.4 a non interference engine? Why does the airbag light flash all the time in your 1998 Toyota tacoma? What cause a fuel gauge on a 2005 Nissan maxima to malfunction full circle and pin underneath the dial? Did install a new fuel pump on a 1990 Nissan 300 zx. still wont start and do have spark. also have ordered a fuel pressure regulator hoping that will fix the problem. any other ideas? What is the code p0708 in 2000 Mazda 626 and where is located?