answersLogoWhite

0

ollie Collinsdepend what car it is. most cars you have 2 10mm bolts at the top of the casing and maybe 2 at the bottom.then disconnect the electrical plug and then lift it upwards and outwards. you may have to disconnect the top radiator hose to get it out.
User Avatar

Wiki User

13y ago

What else can I help you with?

Related Questions

How do you replace the radiator in a Ford Expedition?

The radiator hoses will need to be disconnected. Remove the cooling fan. Unbolt the radiator and any shroud surround and the radiator will come out. Reverse to install.


Toyota Tercel is running a bit hot is this all right?

First of all, check the thermostat, the radiator fan, radiator hoses, water pump, radiator leaks. P.s. If you install a radiator fan universal and it don't place really close to the radiator, you can have that problem


How do you replace the radiator on a 1993 Lexus GS300?

# Disconnect the negative battery cable. Wait at least 90 seconds before performing any other work. # Remove the lower engine cover. # Drain the cooling system. # Remove the air cleaner duct. # Remove the lower (No. 2) fan shroud. # Disconnect the upper and lower radiator hoses from the radiator. # Disconnect and plug the automatic transmission lines. # Disconnect the reservoir tank inlet hose. # Detach the cooling fan motor connector and the coolant temperature switch wiring. # Remove the upper radiator supports and radiator. # Remove both lower supports. # Remove the electric fan and bracket, then remove the No. 1 fan shroud. If the radiator is to be serviced or replaced, remove the coolant temperature switch from the radiator. To install: # Install the coolant temperature switch if it was removed. Tighten it to 65 inch lbs. (8 Nm). # Install the No. 1 fan shroud to the radiator. # Install the electric fan and bracket. # Install the two lower supports to the radiator. Install the radiator with the two upper supports and torque the bolts to 9 ft. lbs. (12 Nm).


1993 acura radiator fan wont turn off?

Check and replace the Relay I was told by dealership that I needed a radiator fan timer but now I don't know where to install the one they sent me


How do you install a radiator 1999 Land Rover?

To install a radiator in a 1999 Land Rover, start by draining the coolant from the system and disconnecting the battery. Remove any components blocking access to the radiator, such as the fan shroud and hoses. Unscrew the mounting bolts and carefully lift the old radiator out, then place the new radiator in position and secure it with the bolts. Reconnect the hoses, fan shroud, and the battery, then refill the cooling system with coolant.


How do you replace a Engine Cooling Fan Relay on a 88 Deville?

To replace the Engine cooling fan relay on a 1988 Deville you need to remove the radiator. After the radiator is out you will see the relay, disconnect it pull it out and install the new one.


Does a 2004 chrysler pt cruiser have a fan clutch?

No, the radiator fan is electric.No, the radiator fan is electric.


How do you install radiator on Plymouth acclaim?

slide radiator down into position behind the radiator support attach the air conditioning condenser to the radiator if so equipped,with force of 10Lbs to seat the radiator assembly lower rubber isolators in the mount holes provided tighten the radiator mounting screws to 9 ft. lbs. connect the automatic transaxle hoses,if so equipped,tighten the hose clamps to 35 inch lbs slide the fan shroud,fan and motor down into the clips on the lower radiator flange .install new shroud retaining clips install upper and lower radiator hoses including the coolant reserve hose plug the fan motor electrical connection and attach the negative battery cable fill the cooling system with coolant


How do you install radiator Isuzu npr?

how do i install a radiator on a 1993 isuzu npr?


How do you install a fan shroud on a 71 Pontiac lemans?

If it's new, you may have to cut it to fit. You don't need to remove the fan to install it, just slide it in between the fan and the radiator. It will be a very tight fit, just go slow. Once it's in, you will need to install the 4 bolts on the top, and 2 on the bottom.


Do you have to remove the fan to install the fan shroud on a 92 Toyota 4 runner?

is it 4 cly or v6? if it is a v6 you can take the fan off, or pull the radiator out.4cyl I'm pretty sure you got to pull the fan off.


How do you install a radiator in a 1998 Ford Contour?

How do you install a radiator in a 1998 ford contour?"