Each spark plug has it's own ignition coil, they are on the spark plug itself. Unplug the ignition coil connector, remove the bolt holding the coil in place, pull the coil off of the spark plug and out of the valve cover. Install the new coil.
1999 Alero how do i test ignition coil pack
REMOVAL PROCEDURE Remove the engine cover. Disconnect the spark plug wires at the ignition coils. Disconnect the ignition coil harness connector. Remove the ignition coil mounting bolts. Remove the ignition coil. INSTALLATION PROCEDURE Install the ignition coil to the bracket. Install the ignition coil mounting bolts. NOTE: Refer to Fastener Notice in Service Precautions. Tighten Tighten the ignition coil mounting bolts to 8 N.m (71 lb in) . Connect the ignition coil harness connector. Connect the spark plug wires at the ignition coils. Install the engine cover.
To replace the ignition coil on a 1999 Isuzu Trooper, first disconnect the negative battery cable to ensure safety. Remove the engine cover, if applicable, and locate the ignition coil, which is typically mounted on or near the engine. Disconnect the electrical connector and unscrew the bolts securing the ignition coil, then carefully pull it out. Install the new coil by reversing the process, ensuring all connections are secure before reconnecting the battery.
with a mechanic
Positive to battery or fuse, light to dimmer switch (if used) Negative to negative on cars ignition coil.
The 2003 Lexus IS300 uses a 2JZ-GE inline-6 Toyota engine, and has 6 ignition coils (coil on plug).
To replace the ignition coil pack on a 1999 Blazer, first disconnect the negative battery terminal to ensure safety. Then, remove the engine cover (if applicable) and locate the ignition coil pack, which is typically mounted on the engine near the spark plugs. Disconnect the electrical connectors and remove the mounting bolts to take out the old coil pack. Install the new coil pack by reversing the process, ensuring all connections are secure before reconnecting the battery.
To replace the cylinder 3 coil pack in a 1999 Lexus RX 300, first, disconnect the negative battery terminal to ensure safety. Remove the engine cover, then locate and disconnect the wiring harness from the coil pack for cylinder 3. Unscrew the bolts securing the coil pack and gently pull it out. Install the new coil pack by reversing the removal steps, ensuring it is seated properly before reconnecting the wiring harness and battery.
you have to buy a whole distributor. coil is not sold by itself
on top of the spark plug
its on the back passenger side of the engine.
take the wires off the + and - side of the coil, pull the coil wire out of the coil, unbolt the coil from the manifold, to install just reverse directions.