See www.isuzufaq.com entry 41. "How do I reprogram my keyless entry fob?"
The first procedure (turn key 3x, close & open door 2x, turn key 5x, close & open door) worked for my 2002 Rodeo.
PAY THE DEALER $350 PLUS TAX
how do i program keyless remote for 2000 Buick LeSabre
The dealers scan tool is required.
See FOB PROG on page 2-19 of your "Owner's Manual", under Section 2: Features and Controls - Keys.....
That depends on the problem. If it's just a battery problem, replace the battery and follow the instructions on the inside of the fob. If the fob has failed, Saturn requires that you take it to a dealer to program the replacement fob.
How do you program a key fob to a 2003 Chevy Malibu
To program a key fob for a 2000 Jaguar XK8, first, insert the key into the ignition and turn it to the "On" position without starting the engine. Within five seconds, press and hold the "Unlock" button on the fob while simultaneously pressing the "Lock" button three times. After that, release the "Unlock" button and turn the ignition off. The fob should now be programmed; test it to ensure it functions correctly.
To open the rear hatch on a 2001 Isuzu Rodeo, first ensure the vehicle is unlocked. Then, locate the latch located at the center of the hatch; you can either pull the handle or press the release button on the key fob if equipped. If the hatch is still stuck, check for any obstructions or issues with the latch mechanism. If needed, you can manually unlock the hatch from the inside by accessing the interior release lever.
To program any kind of key fob you have to take it to a dealership.
How do I re program my key fob for renault laguna estate 1997?
You don't. Take the car and the new fob to a caddy dealer or a locksmith who has the equipment to program it.
See "Programming the Transmitters" on page 10 of chapter 2 "Keys and Doors" in the "OWNER'S MANUAL".....