To program a keyless remote for a 2004 Acura RSX, first, sit in the driver's seat and close all doors. Insert the key into the ignition and turn it to the "On" position, then back to "Off" five times within 10 seconds, ending in the "On" position. The door locks should cycle to indicate the programming mode has been activated. Press any button on the remote; the door locks will cycle again to confirm programming. Repeat for additional remotes if needed, then turn the ignition off to exit programming mode.
How do i you program keyless remote for a 2004 malibu?
how can i program a remote for a 04 kia spectra
You have to program it with a DRB (Scan tool).
try following instructions @ www.programyourremote.com
see also 2004 silverado
I found an Internet site which says how to program the keyless entry remote. But there is an error: this procedure is good for Elantra 2001 to 2003. Elantra 2004 must be programmed by the dealer. http://car.justanswer.com/hyundai/n1kw-program-remote-entry-hyundai-2004
My 2004 land rover discovery 2 doesnt work?
Take the vehicle to a dealer. Not a consumer option.
You need one of these: http://en.wikipedia.org/wiki/Amstrad_CPC_664
one hr of labor like $45.00
all gms with a stock radio keyless remotes get reset though it, again it is step by step in owners manual
To program a keyless remote for a 2004 Kia Amanti, first, sit in the driver's seat and close all doors. Turn the ignition to the "ON" position without starting the engine, then turn it back to "OFF." Repeat this process eight times, ending in the "ON" position. Once the locks cycle, press any button on the remote to program it. If successful, the locks will cycle again to confirm the programming.