put the car in drive and crankshaft wont turn anymore. then you can take off the bolt
Disconnect the battery and remove the fan assembly and crankshaft belts. Remove the center bolt from the pulley and use a crankshaft pulley remover to pull off the pulley. You can usually borrow one from an auto parts store.
on the Chrysler engine (420a) you do need a puller and installer to deal with the crankshaft dampener pulley.
You need to remove the bolt, insert the special tool in the hole, and install a three jaw puller to pull the pulley off.
To remove the crankshaft pulley on an Opel Astra Ecotec, first, ensure the engine is cool and disconnect the battery. Use a socket to remove the bolt securing the pulley, but you may need to hold the crankshaft in place with a crankshaft holding tool or a flywheel lock. Once the bolt is removed, gently pull the pulley off the crankshaft. If it's stuck, using a harmonic balancer puller can help safely extract it without damage.
What tools do you need to remove the crankshaft pulley on a 1995 Honda Passport?
Depending on engine displacement in general remove belt-s then bolt holding pulley to the crankshaft then using a puller remove the pulley, when installing use a installer not a hammer to put the pulley on the crankshaft.
u need to buy new pulley then, remove serpentine belt from engine remove bolts that hold pulley to crankshaft remove pully instalation is exact opposite of removalAnsweru need to buy new pulley then, remove serpentine belt from engine remove bolts that hold pulley to crankshaft remove pully instalation is exact opposite of removal Answeru need to buy new pulley then, remove serpentine belt from engine remove bolts that hold pulley to crankshaft remove pully instalation is exact opposite of removal
yes it turns and it is very hard to remove without the proper tool, you need to go to your favorite auto part website and look for a crankshaft pulley removal tool
The crankshaft pulley unbolts from the harmonic balancer. The harmonic balancer can be removed from the crankshaft with a 3 bolt puller.
To remove the crankshaft pulley on a Chevy Malibu 2.4, first ensure the vehicle is safely elevated and secure. Remove the serpentine belt and any necessary components obstructing access to the pulley, such as the engine cover. Use a suitable socket to remove the bolt securing the pulley, and if needed, employ a crankshaft pulley puller to gently detach the pulley from the crankshaft. Always consult a repair manual for specific torque specifications and procedures.
you just need a puller to take it off, it's not a special puller.
Hello! The crankshaft position sensor is located behind the crankshaft pulley,on the left side facing the front of the car.It is difficult to see and to remove it you need to remove the crankshaft pulley ( radiator,belts,.... )