0
1.get the tire off 2.remove the locking hubs 3.this is where you are going to need a special spindle nut socket in order to remove the spindle nuts (where to get one of those im not sure but i think Napa or Autozone would sell something like that.) 4.after you get the spindle nuts off you remove the calipers
What else can I help you with?
How do you change front brake rotors on your 95 blazer?
It can be easy to change the brake rotors. Lift the car, remove the tire, brake shoe and rotor, put on the new rotor, replace the brake shoe, tire and lower the car.
How do you remove a front brake rotor on a 1995 CHEVY K3500?
Remove the tire and wheel from your 1995 Chevrolet K 3500. Remove the front brake assembly. Tap on the brake rotor with a hammer or mallet until it becomes loose. Slide the brake rotor off.
How do you remove a front brake rotor off a 1995 Chevy c1500?
Remove the tire and wheel from your 1995 Chevy. Remove the brake assembly. Tap on the brake rotor with a mallet or hammer. The brake rotor will slide off.
How do you remove the front brake rotor on a 1999 ford escort?
Remove the wheel and tire assembly and the brake caliper then the brake rotor will slide right off.
How you remove a front brake rotor on a 2004 Chevy Colorado?
The front brake rotor, on a 2004 Chevrolet Colorado, can be removed by first removing the wheel. Next, remove the brakes. The rotor will slide off
How do you remove rear brake rotor Chevy blazer?
To remove the rear brake rotor from a Chevy Blazer, start by lifting the vehicle and securing it on jack stands. Remove the wheel and tire, then detach the brake caliper by unbolting it and hanging it securely to avoid stress on the brake line. Next, remove the caliper bracket if necessary, and then pull off the rotor. If the rotor is stuck, gently tap it with a hammer to loosen it, ensuring to avoid damaging other components.
How do you repace front abs sensors on 1996 blazer s10?
Remove the wheel, remove the brake caliper, remove the brake rotor, disconnect wheel speed sensor from harness. remove the bearing hub, remove the wheel speed sensor from the bearing hub. Reverse order for install.
How do you change the front brake rotor 1991 eclipse?
Jack up the front of your 1991 Mitsubishi Eclipse. Remove the brake pad assembly. Loosen the brake rotor by tapping on it with a hammer or mallet. Slide the brake rotor off. Reverse the process to install the new brake rotor.
How do you remove the front rotor on 1999 RX300?
Remove the brake caliper and hang it out of the way, then thread 2 8 mm bolts into the holes provided on the disk. Screw them in and the brake rotor will come off.
How do you remove the front brake rotor on a 2003 Mazda MPV?
nb,
How do you change the rotor 1990 Chevy blazer?
Lift the wheel in Question. Remove the tire. Remove the disc brake assembly. pull the rotor off. replace in reverse order.
Remove front rotors 2004 Honda accord?
Remove the tire and wheel. Remove the brake pads and break hardware. The brake rotor will slide off. You may need to tap the rotor with a hammer.
