Remove the screws in the wheel wells and underneath the plastic cover to remove the bumper cover. Then you can see to remove the actual bumper.
throw a hand grenade at it
The 2007 Santa Fe rear bumper is held in place by eight retaining bolts. Remove the retaining bolts and the bumper will come off.
Transmission cooler is in front of the a/c condenser behind the front bumper. It is the smallest radiator looking component behind the front bumper
It's under front bumper mounted near, or in front of A/C radiator. It's visible when bumper is removed.
Behind the front bumper
The Washer pump is on the bottom of the reservoir - but you have to remove the front bumper to access it, so be sure it it sht pump and not the switch. Yes I said you have to remove the front bumper to access it. You can go to the very helpful Hyundai web site http://www.hmaservice.com create a login and see schematics. It's a little tricky, but with trial and error you can see just about everything.
To remove the rear bumper on a 2001 Hyundai Santa Fe, start by disconnecting the negative battery cable for safety. Next, remove any screws or bolts securing the bumper to the vehicle, typically found underneath and at the rear edges. Carefully pull the bumper away from the body, detaching any clips or connectors, and finally, lift it off. Make sure to keep track of all fasteners for reinstallation.
I will be doing mine this week, i will get back to you. I will be doing mine this week, i will get back to you.
its located behind the plastic "wall" that is between the right bumper and the right front wheel. if you remove the screws you will find the pump and the base of the windshield wiper fluid container.
To remove the rear bumper from a 2004 Hyundai Santa Fe, start by opening the rear hatch and removing any screws or clips securing the bumper at the top edge. Next, locate and remove the bolts on either side of the bumper, usually found inside the wheel wells. Finally, gently pull the bumper away from the vehicle, taking care to disconnect any wiring for lights if applicable. Make sure to have a helper if the bumper is heavy or awkward to handle.
Changing a bumper cover on a 2008 Hyundai Santa Fe typically takes about 1 to 2 hours, depending on the experience of the person performing the task and whether any additional components need to be removed. The process involves removing screws, clips, and possibly disconnecting electrical components if applicable. Having the right tools and a clear workspace can help speed up the process.