To remove the radiator from a 1990 Honda CRX, first ensure the engine is cool and disconnect the negative battery terminal. Drain the coolant by opening the petcock at the bottom of the radiator, then remove the upper and lower radiator hoses. Next, detach any mounting bolts or brackets securing the radiator, and carefully lift it out of the engine bay. Remember to also disconnect the fan assembly if it’s attached to the radiator.
For crx si the hp is 108.
it will fit if you want it to. my buddy had a crx si with ls vtech and a Chevy radiator. and i have a 86 crx and just put a prelude radiator in it last night
follow your bottom radiator hose to the thermostat housing remove the 2 10mm screws and there is the thermostat
To flush the radiator on an '89 Honda CRX, start by ensuring the engine is cool and then place a drain pan underneath the radiator. Open the radiator drain valve or remove the lower radiator hose to drain the old coolant. Next, fill the radiator with a mixture of water and a radiator flush solution, run the engine for about 10-15 minutes, then drain again. Finally, refill the radiator with fresh coolant and check for leaks.
NO
crxresource.org
honda civics hatchbacks
Remove the plastic cover over the switch at the clutch pedal. The CRX switch can be unscrewed and replaced by disconnecting the wires and twisting the switch out.
Yes it does.
Everything! Its a honda, Get a ford!
CRX
The speed sensor is what sends signals to the speedometer to display how fast a car is traveling. To find it on a 1990 Honda Crx Si it will be mounted on top of the transmission housing.