To remove the rear seat from a 1998 Hyundai Excel, first, locate the seat release levers or bolts, which are typically found at the base of the seat cushion or along the backrest. Pull or unbolt these fasteners to release the seat cushion, then lift it out. For the seat back, check for any bolts or clips securing it to the vehicle, remove them, and then carefully pull the backrest upward to detach it. Always refer to your vehicle's manual for specific instructions and safety precautions.
You can get to the fuel pump by removing the rear seat and you will see a bolted down access panel for the fuel pump.
2000 sonata rear seat removal
The rear seat on a 2002 Hyundai has bolt behind the seats. Push the seat down to reveal the bolts, and loosen them. The seat will be able to be removed from the vehicle.
To remove the 2002 Hyundai accent rear seats find the tabs that cover the bolts and unbolt them. After the bolts are out lift the seat to remove it from the car.
On the 1989 Hyundai Excel, the fuel pump is located inside the fuel tank. To access it, you'll typically need to remove the rear seat and then take off the access cover, or alternatively, you can remove the fuel tank itself. Always ensure to follow safety precautions when working with fuel systems.
To remove a 2002 Hyundai XG350 seat, first, slide the seat all the way forward to access the rear bolts. Use a socket wrench to remove the bolts securing the seat to the floor. Once the rear bolts are out, slide the seat backward to access the front bolts and remove them as well. Finally, disconnect any electrical connectors for seat adjustments or airbags, then carefully lift the seat out of the vehicle.
for Hyundai accent gsi (yr 2000) needed: 12mm short socket ratchet remove spare tire cover. Fold down rear seats. Remove the bolt holding each seat separately onto hinge. remove these two pieces. Remove the two bolts from each side from the rear of bottom seat section. From the front of the rear seat there are two buttons-levers-mini handles.. push those towards the rear of the car and pull up on seat cushion.
To remove the rear seat of a 2005 Hyundai Santa Fe, start by locating the release levers or bolts at the base of the seat. For the bottom seat cushion, pull up on the front edge to release it from the clips and then lift it out. For the seatback, look for bolts or release mechanisms at the bottom or sides and remove them. Once detached, carefully lift the seatback out of the vehicle.
you need to remove the rear seat
To access the fuel pump on a 1992 Hyundai Excel, you'll need to first remove the rear seat cushion, which can typically be lifted or unbolted depending on the model. Once the seat is removed, you'll find a cover over the fuel pump access point on the fuel tank. Remove this cover and then disconnect the electrical connector and fuel lines before unscrewing the pump from its housing to remove it. Always ensure the fuel system is depressurized before starting this process for safety.
under the rear seat, round black cap in fuel tank, pump is inserted into fuel tank.
under the passenger seat