pull off the front wheels. remove the calipers. remove the two screws that hold on the rotors. replace the rotors and reverse the procedure.
they have to pressed out from a machine shop.
Remove the tire and wheel. Remove the brake pads and break hardware. The brake rotor will slide off. You may need to tap the rotor with a hammer.
The minimum brake rotor thickness for the front and back rotors on a 1992 Honda Accord is 21mm. Rotors which are below this thickness will not offer adequate or reliable braking.
take brakes off and calipers off, next rotors should come off easily.
Front? Rear?
I want to know. Chilton's says remove the four screws from the back and the rotor assy should drop out. Not so! there is a trick and I want to know what it is!
This video on YouTube (see Related Links) will show you how to remove the front bumper cover from of a 2004-2007 Honda Accord.
The easiest way is to remove the front seats from a Honda Accord dx 2004 is with the brackets attached; that way you should just have to unbolt them from the floorboard.
You must remove the wheel/tire in order to remove the front strut.
Front studs on a 1999 Honda Accord are pressed in. First the studs must be removed using a hammer or press. Once remove each stud can be pressed in.
The 2006 Honda Accord has 54.6 in. of front hip room.