Kick it!
There is nothing holding it in beside the rubber, so with a soft mallet hit the edge until it comes free. When putting back in use rope inside the groove of the rubber, and once seated pull the rope to make the seal. Also recommend silicone to stop the rust.
Clutch shares fluid reservoir with brake system, open drivers door and pull off small plastic panel at side of dashboard.
http://www.ebay.co.uk/itm/KIA-PREGIO-WORKSHOP-REPAIR-MANUAL-2004-/300919205330
the correct torque for cylinder head bolt of kia pregio 2.7 diesel is 130-135ft-lbs.
The correct tire pressure of kia pregio is 50 psi.If the ambient temperature is higher,say going above 35deg,then keep it 45psi
Under the little front bonnet.
Ineed my code ratio for my kia pregio 3.0 2000
The 2003 Kia drivers side door panel is held in place with two retaining clips and 10 retaining clips. Pry outward on each retaining clip and remove the retaining bolts.
To remove a rear door panel on a 2006 kia sodona you need to take it to a professional mechanic to have it removed.
The VIN (Vehicle Identification Number) on a Kia Pregio can typically be found in several locations. Common spots include the driver's side dashboard, visible through the windshield, and on the driver's side door jamb. Additionally, the VIN may also be located on the vehicle's registration documents and insurance card. Always refer to the owner's manual for specific details related to your model.
Open the driver door and its on the side of the dash, where the hinges are. Just give the plastic cover a good pull and it will come off.
A pregio typically refers to a type of vehicle, specifically the Kia Pregio, which is a van. The battery used in the Kia Pregio is usually a lead-acid battery, commonly a 12V type, suitable for powering the vehicle's electrical systems. Depending on the model year and engine specifications, the exact battery size and rating may vary. Always check the owner's manual or consult with a professional to ensure compatibility.
With a crowbar.