0
There are four O2 sensors on a 1998 Honda Passport, so when you have it put on a computer and it shows up "O2 Sensor" make sure to get more info such as Right bank, Left bank, etc, or it will be just a shot in the dark which one is bad. They are pretty easy to find just follow your exhaust system out from the engine.
What else can I help you with?
How do you replace oxygen sensor in Honda Odyssey?
To replace the oxygen sensor on a Honda Odyssey, first unscrew the sensor. Then use a 22 mm socket or 7/8 inch wrench to replace the oxygen sensor.
What is r and r 02 sensor in a 2001 Honda Passport?
remove and replace.
Where is knock sensor for Honda Passport 98?
Where is knock sensor for Honda Passport 98?Read more: Where_is_knock_sensor_for_Honda_Passport_98
How do you replace an oxygen sensor in 2001 Honda accord?
Is it the back one or is it the front one...?
How do i replace 1994 Honda Del Sol oxygen sensor?
How is the wire of o2 sensors in a honda del sol 1993?
How do you replace oxygen sensor in Honda civic?
The oxygen sensor on a Honda Civic is replaced by disconnecting the wiring harness and removing the sensor using a socket wrench. Anti-seize paste is applied to the threads, a new sensor is torqued into place, and the wires reconnected.
How do you test oxygen sensor for 1990 accord?
how to replace the water pump on a 1998 Honda Accord
How do you replace oxygen sensor on 1988 Honda CRX?
To replace the oxygen sensor on a 1988 Honda CRX, first, locate the sensor, which is usually found on the exhaust manifold. Disconnect the negative battery terminal, then unplug the old oxygen sensor's electrical connector. Use a wrench or oxygen sensor socket to unscrew the old sensor, and then install the new sensor by threading it into the exhaust manifold and tightening it securely. Reconnect the electrical connector and the negative battery terminal before starting the engine to test the installation.
Where is the oxygen sensor located on a 1996 Honda Accord and how do you replace it?
THE O2 SENSOR IS LOCATED ON THE MANIFOLD. IT JUST UNSCREWS OFF THE SIDE OF IT, THEN YOU JUST UNPLUG IT.
Where is Honda City oxygen sensor located?
Oxygen sensor is located at the exhuast Manifold.
How do you replace the oxygen sensor on a 1991 Honda CRX?
All you have to do is look at your exhaust manifold there is a sensor screwed into your manifold ,that is plugged into a connector on the left side of motor unsrew the sensor and unplug the sensor wire and that is all you do and replace with a new sensor really simple fix
How do you replace oxygen sensor Honda Civic?
If you open the hood of your Honda Civic, most likely you will locate the oxygen sensor (O2) mounted in the exhaust manifold, above the exhaust pipe flange. On some models the exact location might vary, but you can always find the sensor by following the exhaust manifold and pipe. Depending on the year model of your Honda Civic, you may find a Primary Oxygen Sensor (PHO2) right before the catalytic converter and a Secondary Oxygen Sensor (SHO2) right after the catalytic.
